Buy B5100 Lock Set Mortise part by Lockwood Corp

Part Number: B5100

Manufacturer: lockwood corp

NSN: 5340-00-964-3921

NIIN: 009643921

Item Name : lock set mortise

CAGE Code: 01096

INC Code: 06701

Country: USA

NCB Code: 00

We've received your request for B5100 (described as Lock Set Mortise), manufactured by Lockwood Corp with CAGE code 01096. This part is registered under NSN 5340-00-964-3921, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-964-3921, NCB code 00 (origin: USA), and INC 06701. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your B5100 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for B5100

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part B5100, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5340-00-964-3921, 5340009643921

MRC	Criteria	Characteristic
APGF	DESIGN TYPE	LATCH BOLT
ASBH	FACE SHAPE	BEVELED
CBBL	FEATURES PROVIDED	KNOB HANDLE AND KEY PLATE AND SPINDLE AND STRIKE AND ROSE AND SCREW
CHMF	KNOB SHAPE	ROUND
FEAT	SPECIAL FEATURES	WHEN DOOR IS CLOSED AUXILARY BOLT DEAD LOCKS LATCH BOLT AGAINST END PRESSURE;CASE THICKNESS:0.875 IN.THK;OUTSIDE SPACING,KNOB HUB CENTER TO CYLINDER CENTER:4.000 IN.
MATT	MATERIAL	COPPER ALLOY KNOB
SFTT	SURFACE TREATMENT	CHROMIUM KNOB
SHPE	SHAPE	RECTANGULAR CASE
ABGL	WIDTH	1.250 INCHES NOMINAL
ABNM	THICKNESS	1.375 INCHES NOMINAL OVERALL
ABRY	LENGTH	8.000 INCHES NOMINAL
APHE	OPERATION METHOD	OUTSIDE KEY LATCH BOLT AND OUTSIDE TURN KNOB LATCH BOLT AND INSIDE TURN KNOB LATCH BOLT
ASSK	KNOB QUANTITY	2
BTJY	BOLT TYPE	REVERSE BEVEL
CHLZ	LOCKING MECHANISM TYPE	PIN TUMBLER
HGTH	HEIGHT	6.000 INCHES NOMINAL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 8302418035 (NAICS 332510)	Other base metal mountings, fittings and similar articles (not hinges) suitable for interior and exterior doors
SITC : 69916	Mountings, fittings and similar articles for buildings, n.E.S., of base metal

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown