Buy 5004-135-ICCSF Adapter Connector part by Marsh E F Engineering Co

Part Number:  5004-135-ICCSF
Alternate P/N:  5004135ICCSF
Manufacturer:  marsh e f engineering co
NIIN:  012741354
Item Name :  adapter connector
CAGE Code:  30993
INC Code:  15091
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 5004-135-ICCSF (described as Adapter Connector), manufactured by Marsh E F Engineering Co with CAGE code 30993. This part is registered under NSN 5935-01-274-1354, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-274-1354, NCB code 01 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5004-135-ICCSF requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5004-135-ICCSF

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 5004-135-ICCSF, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 5004-135-ICCSF with NSN 5935-01-274-1354, 5935012741354

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-274-1354

Item PartTypeName:

ADAPTER,CONNECTOR

59350127413540PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
3082-4031-02595

Characteristics Data of NSN 5935-01-274-1354, 5935012741354

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2B AND 2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE,INTERNAL COUPLING
ABHPOVERALL LENGTH1.281 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.828 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONVIBRATION RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY2
AFQXCONTACT POSITION ARRANGEMENT STYLEN 1ST MATING END
AFQXCONTACT POSITION ARRANGEMENT STYLESMA 2ND MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS335.0 ALL MATING ENDS SINGLE CONTACT GROUPING
AFRFCONTACT MAXIMUM FREQUENCY RATING15000.0 MEGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODINTERNALLY THREADED COUPLING RING AND EXTERNALLY THREADED SHELL
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CMLPTHREAD QUANTITY PER INCH24 AND 36
CQJXNOMINAL THREAD SIZE0.625 INCHES AND 0.250 INCHES
CQTZCONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND COPPER ALL MATING ENDS SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 2,CL 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-14550 MIL SPEC 2ND TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CSWMSHELL SURFACE TREATMENTGOLD AND COPPER
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 2,CL 1 MIL SPEC 1ST TREATMENT RESPONSE
CXCGINCLUDED CONTACT QUANTITY1 1ST MATING END SINGLE CONTACT GROUPING
CXCGINCLUDED CONTACT QUANTITY1 2ND MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL PIN 1ST MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET 2ND MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT AND SHELL SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.105 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
THSDTHREAD SERIES DESIGNATORUNEF AND UNS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top