Buy 407-4336 Switch Toggle part by Mason Electric Company

Part Number:  407-4336
Alternate P/N:  4074336
Manufacturer:  mason electric company
NIIN:  012774025
Item Name :  switch toggle
CAGE Code:  81579
FSC:  5930 Switches
INC Code:  00184
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 407-4336 (described as Switch Toggle), manufactured by Mason Electric Company with CAGE code 81579. This part is registered under NSN 5930-01-277-4025, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-277-4025, NCB code 01 (origin: USA), and INC 00184. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 407-4336 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 407-4336

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 407-4336, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 407-4336 with NSN 5930-01-277-4025, 5930012774025

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-277-4025

Item PartTypeName:

SWITCH,TOGGLE

59300127740250P
CIICHCCESDPMICCriticalityENAC
U S
Part NumberISCRNVCRNCCHCCMSDSSADC
407-4336595

Characteristics Data of NSN 5930-01-277-4025, 5930012774025

MRCCriteriaCharacteristic
AAQLBODY STYLEHOLE MOUNT
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONSALT SPRAY RESISTANT
ABKWOVERALL HEIGHT1.490 INCHES NOMINAL
ABPMBODY DIAMETER0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
AFUQACTUATOR STYLEROUND,STEPPED
AFURACTUATOR DIAMETER0.620 INCHES MINIMUM AND 0.680 INCHES MAXIMUM
AFUSACTUATOR HEIGHT0.470 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AFUXACTUATOR POSITION-ACTION RELATIONSHIPUP POSITION MOMENTARY AND DOWN POSITION MOMENTARY AND CENTER POSITION MAINTAINED AND LEFT POSITION MOMENTARY AND RIGHT POSITION MOMENTARY
AFVAACTUATOR COLORGRAY/GREY SINGLE ACTUATOR
AFXEMAXIMUM VOLTAGE RATING IN VOLTS28.0 DC
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
AKNAINCLOSURE TYPEFULLY INCLOSED
AXGYMOUNTING METHODUNTHREADED HOLE
CRLDNONPILE-UP CONTACT ARRANGEMENT1 FOUR THROW,NORMALLY OPEN,MOMENTARY ACTION SINGLE SWITCH UNIT
CWJKCASE MATERIALPLASTIC
CXQRCONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE1.000 AMPERES INDUCTIVE DC
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACTS SILVER
TTQYTERMINAL TYPE AND QUANTITY4 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top