Buy 466LH-G71 Resistor Variable W part by Measurement Systems Inc

Part Number:  466LH-G71
Alternate P/N:  466LHG71
Manufacturer:  measurement systems inc
NIIN:  009747060
Item Name :  resistor variable w
CAGE Code:  22978
INC Code:  37406
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 466LH-G71 (described as Resistor Variable W), manufactured by Measurement Systems Inc with CAGE code 22978. This part is registered under NSN 5905-00-974-7060, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-974-7060, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 466LH-G71 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 466LH-G71

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 466LH-G71, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 466LH-G71 with NSN 5905-00-974-7060, 5905009747060

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-974-7060

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050097470600NA
CIICHCCESDPMICCriticalityENAC
UAA
Part NumberISCRNVCRNCCHCCMSDSSADC
380-1077-020223

Characteristics Data of NSN 5905-00-974-7060, 5905009747060

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH0.125 INCHES MINIMUM
ABPMBODY DIAMETER1.156 INCHES MINIMUM AND 1.158 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM
ABXFSHAFT LENGTH0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
ADAQBODY LENGTH1.105 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBEARING
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE8.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE8.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE56.00 INCH-OUNCES
AFJNFRAGILITY FACTORMODERATELY RUGGED
APXHTERMINAL LOCATIONREAR END
AXGYMOUNTING METHODTERMINAL
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCCELECTRICAL RESISTANCE PER SECTION425.0 OHMS SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY4 PIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL -------
Quantity per pack 1
Repariability If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top