Buy 605-30-1F18 Attenuator Fixed part by Meca Electronics Inc

Part Number:  605-30-1F18
Alternate P/N:  605301F18
Manufacturer:  meca electronics inc
NIIN:  016190527
Item Name :  attenuator fixed
CAGE Code:  22424
INC Code:  14224
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 605-30-1F18 (described as Attenuator Fixed), manufactured by Meca Electronics Inc with CAGE code 22424. This part is registered under NSN 5985-01-619-0527, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-619-0527, NCB code 01 (origin: USA), and INC 14224. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 605-30-1F18 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 605-30-1F18

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 605-30-1F18, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 605-30-1F18 with NSN 5985-01-619-0527, 5985016190527

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-01-619-0527

Item PartTypeName:

ATTENUATOR,FIXED

5985016190527P
CIICHCCESDPMICCriticalityENAC
A0
Part NumberISCRNVCRNCCHCCMSDSSADC
605-30-1F18523

Characteristics Data of NSN 5985-01-619-0527, 5985016190527

MRCCriteriaCharacteristic
AJDBPOWER RATING2.0 WATTS AVERAGE
AAQLBODY STYLEROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
AAFZBODY MATERIALSTEEL, CORROSION RESISTING
BBHSTERMINAL TYPE AND QUANTITY2 PIN
ABHPOVERALL LENGTH1.760 INCHES NOMINAL
ADAVOVERALL DIAMETER0.620 INCHES MINIMUM AND 0.820 INCHES MAXIMUM
AHTWVOLTAGE STANDING WAVE RATIO1.15 AND 1.20 AND 1.25 AND 1.30 AND 1.40
AJDKRF SIGNAL ATTENUATION IN DECIBELS30.0
AXGYMOUNTING METHODTERMINAL
BNGRFREQUENCY RANGE18.0 HERTZ MAXIMUM
AFGAOPERATING TEMP RANGE-55.0 TO 85.0 DEG CELSIUS

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

ADPE Represents items with no adp components
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top