Buy NCS300-2 Microcircuit Linear part by Microchip Technology Incorporated

Part Number:  NCS300-2
Alternate P/N:  NCS3002
NIIN:  007282976
Item Name :  microcircuit linear
CAGE Code:  60991
INC Code:  31778
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for NCS300-2 (described as Microcircuit Linear), manufactured by Microchip Technology Incorporated with CAGE code 60991. This part is registered under NSN 5962-00-728-2976, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5962 Microcircuits Electronic. Our verification process will confirm traceability through supporting identifiers including NIIN 00-728-2976, NCB code 00 (origin: USA), and INC 31778. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your NCS300-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NCS300-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part NCS300-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number NCS300-2 with NSN 5962-00-728-2976, 5962007282976

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-00-728-2976

Item PartTypeName:

MICROCIRCUIT,LINEAR

59620072829760NB
CIICHCCESDPMICCriticalityENAC
UBG0
Part NumberISCRNVCRNCCHCCMSDSSADC
2502AE001295

Characteristics Data of NSN 5962-00-728-2976, 5962007282976

MRCCriteriaCharacteristic
ABKWOVERALL HEIGHT0.640 INCHES MINIMUM AND 0.980 INCHES MAXIMUM
ADARBODY OUTSIDE DIAMETER0.335 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
AEHXMAXIMUM POWER DISSIPATION RATING300.0 MILLIWATTS
AFJQSTORAGE TEMP RANGE-65.0 TO 150.0 DEG CELSIUS
CBBLFEATURES PROVIDEDW/RESISTOR AND HERMETICALLY SEALED AND HYBRID AND POSITIVE OUTPUTS AND HIGH FREQUENCY
CQSJINCLOSURE MATERIALMETAL
CQSZINCLOSURE CONFIGURATIONCAN
CWSGTERMINAL SURFACE TREATMENTGOLD
PRMTPRECIOUS MATERIALGOLD
TTQYTERMINAL TYPE AND QUANTITY10 PIN
ADAUBODY HEIGHT0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
AFGAOPERATING TEMP RANGE-55.0 TO 125.0 DEG CELSIUS
CQZPINPUT CIRCUIT PATTERN2 INPUT
CZENVOLTAGE RATING AND TYPE PER CHARACTERISTIC17.0 VOLTS MAXIMUM POWER SOURCE
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES GOLD
TESTTEST DATA DOCUMENT97942-577R508 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8542900000 (NAICS 334413) Electronic integrated circuits and microassembly parts
SITC : 77689 Parts of electronic integrated circuits and microassembles

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-v
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top