Buy BR23-S0072 Relay Electromagnet part by Microsemi Corporation

Part Number:  BR23-S0072
Alternate P/N:  BR23S0072
Manufacturer:  microsemi corporation
NIIN:  010471788
Item Name :  relay electromagnet
CAGE Code:  56623
INC Code:  32512
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for BR23-S0072 (described as Relay Electromagnet), manufactured by Microsemi Corporation with CAGE code 56623. This part is registered under NSN 5945-01-047-1788, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 01-047-1788, NCB code 01 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your BR23-S0072 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BR23-S0072

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part BR23-S0072, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number BR23-S0072 with NSN 5945-01-047-1788, 5945010471788

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-01-047-1788

Item PartTypeName:

RELAY,ELECTROMAGNETIC

59450104717880N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
930A515-2523

Characteristics Data of NSN 5945-01-047-1788, 5945010471788

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH1.720 INCHES MAXIMUM
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.406 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH0.500 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKWOVERALL HEIGHT1.510 INCHES MAXIMUM
ABMKOVERALL WIDTH1.000 INCHES MAXIMUM
ABTDMOUNTING SLOT WIDTH0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY
ADZCENVIRONMENTAL PROTECTIONHERMETIC
AKDXWINDING QUANTITY2
APCNCOIL QUANTITY2
APNAWINDING DC RESISTANCE RATING300.0 OHMS NOMINAL ALL WINDINGS
APNPDUTY TYPECONTINUOUS
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 SLOTTED HOLE SINGLE MOUNTING FACILITY
CBBLFEATURES PROVIDEDLATCHING CONTACTS AND POLARIZED
CQYJMOUNTING FACILITY PATTERNRECTANGULAR SINGLE MOUNTING FACILITY
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT4 POLE,DOUBLE THROW,ONE POSITION MOMENTARY
CRXHTIME DELAY0.01 SECONDS MAXIMUM FIXED OPERATE TIME
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP26.0 VOLTS DC 25 DEG CELSIUS ALL WINDINGS
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE10.0 AMPERES AC AND 10.0 AMPERES DC RESISTIVE LOAD
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS115.0 AC AND 28.0 DC
TTQYTERMINAL TYPE AND QUANTITY16 PIN ALL FUNCTIONS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536490075 (NAICS 335314) Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1, 000 v, nesoi
SITC : 77254 Relays for electrical apparatus used with electrical circuits not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top