Buy IC7-00011-001 Microcircuit Digita part by Microsource Corp

Part Number:  IC7-00011-001
Alternate P/N:  IC700011001
Manufacturer:  microsource corp
NIIN:  011758583
Item Name :  microcircuit digita
CAGE Code:  66449
INC Code:  31779
Country:  USA
NCB Code:  01

We've received your request for IC7-00011-001 (described as Microcircuit Digita), manufactured by Microsource Corp with CAGE code 66449. This part is registered under NSN 5962-01-175-8583, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-175-8583, NCB code 01 (origin: USA), and INC 31779. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your IC7-00011-001 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for IC7-00011-001

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part IC7-00011-001, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number IC7-00011-001 with NSN 5962-01-175-8583, 5962011758583

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-01-175-8583

Item PartTypeName:

MICROCIRCUIT,DIGITAL

5962011758583NB
CIICHCCESDPMICCriticalityENAC
BA0
Part NumberISCRNVCRNCCHCCMSDSSADC
1002290-111CA

Characteristics Data of NSN 5962-01-175-8583, 5962011758583

MRCCriteriaCharacteristic
ADAQBODY LENGTH0.840 INCHES MAXIMUM
ADATBODY WIDTH0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
ADAUBODY HEIGHT0.185 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-55.0 TO 125.0 DEG CELSIUS
AFJQSTORAGE TEMP RANGE-65.0 TO 150.0 DEG CELSIUS
AGAVEND ITEM IDENTIFICATION6660-01-148-1772 METEOROLOGICAL
CBBLFEATURES PROVIDEDHERMETICALLY SEALED AND PRESETTABLE AND RETRIGGERABLE
CQSJINCLOSURE MATERIALCERAMIC AND GLASS
CQSZINCLOSURE CONFIGURATIONDUAL-IN-LINE
CQWXOUTPUT LOGIC FORMCOMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC
CQZPINPUT CIRCUIT PATTERNDUAL 3 INPUT
CSSLDESIGN FUNCTION AND QUANTITY2 MULTIVIBRATOR,MONOSTABLE
CTFTCASE OUTLINE SOURCE AND DESIGNATORD-2 MIL-M-38510
CWSGTERMINAL SURFACE TREATMENTSOLDER
CZENVOLTAGE RATING AND TYPE PER CHARACTERISTIC-0.5 VOLTS MINIMUM POWER SOURCE AND 18.5 VOLTS MAXIMUM POWER SOURCE
CZEQTIME RATING PER CHACTERISTIC600.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,LOW TO HIGH LEVEL OUTPUT AND 600.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,HIGH TO LOW LEVEL OUTPUT
TESTTEST DATA DOCUMENT96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS,INDIVIDUAL MANUFACTUREER STANDARDS,ETC.).
TTQYTERMINAL TYPE AND QUANTITY16 PRINTED CIRCUIT

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8542900000 (NAICS 334413) Electronic integrated circuits and microassembly parts
SITC : 77689 Parts of electronic integrated circuits and microassembles

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS S9e
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top