Buy 90AC46 2E Adapter Waveguide part by Microwave Development Laboratories

Part Number:  90AC46 2E
NIIN:  011393921
Item Name :  adapter waveguide
CAGE Code:  01456
INC Code:  00186
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 90AC46 2E (described as Adapter Waveguide), manufactured by Microwave Development Laboratories with CAGE code 01456. This part is registered under NSN 5985-01-139-3921, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-139-3921, NCB code 01 (origin: USA), and INC 00186. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 90AC46 2E requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 90AC46 2E

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 90AC46 2E, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 90AC46 2E with NSN 5985-01-139-3921, 5985011393921

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-01-139-3921

Item PartTypeName:

ADAPTER,WAVEGUIDE

59850113939210P
CIICHCCESDPMICCriticalityENAC
7 A
Part NumberISCRNVCRNCCHCCMSDSSADC
90AC46-2E525

Characteristics Data of NSN 5985-01-139-3921, 5985011393921

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEINTERNAL,RECTANGULAR EXTERNAL,RECTANGULAR
AAJDTHREAD CLASS2B SINGLE FLANGE ALL CONNECTION FACILITIES
AAJFTHREAD DIRECTIONRIGHT-HAND SINGLE FLANGE ALL CONNECTION FACILITIES
AGAVEND ITEM IDENTIFICATIONAN/SPG-55B
AHRVTUBING WALL CONSTRUCTION STYLESEAMLESS SINGLE TUBING SEGMENT
AHSFFLANGE QUANTITY1
AHSXFLANGE INSIDE WIDTH0.900 INCHES NOMINAL SINGLE FLANGE
AHSYFLANGE INSIDE HEIGHT0.400 INCHES NOMINAL SINGLE FLANGE
AHSZFLANGE OUTSIDE WIDTH1.625 INCHES NOMINAL SINGLE FLANGE
AHTAFLANGE OUTSIDE HEIGHT1.625 INCHES NOMINAL SINGLE FLANGE
AHTBFLANGE INSIDE DIAMETER1.422 INCHES NOMINAL SINGLE FLANGE
AHTDFLANGE DEPTH0.438 INCHES NOMINAL SINGLE FLANGE
AHTWVOLTAGE STANDING WAVE RATIO1.25
AHTXINSERTION LOSS IN DECIBELS0.10
AHUCCOAXIAL CONNECTOR SERIES DESIGNATIONN
AHUDCONNECTOR END DESIGNFEMALE
BBPNADAPTER LENGTH1.150 INCHES MAXIMUM
BBPQADAPTER HEIGHT1.625 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH32 SINGLE FLANGE ALL CONNECTION FACILITIES
CQGMMAXIMUM OPERATING PRESSURE14.0 POUNDS PER SQUARE INCH GAGE
CQHNWAVEGUIDE OUTSIDE WIDTH1.000 INCHES NOMINAL
CQJXNOMINAL THREAD SIZE0.164 INCHES SINGLE FLANGE ALL CONNECTION FACILITIES
CRFHWAVEGUIDE INSIDE WIDTH0.900 INCHES NOMINAL
CRLBWAVEGUIDE INSIDE HEIGHT0.400 INCHES NOMINAL
CSFCWAVEGUIDE OUTSIDE HEIGHT0.500 INCHES NOMINAL
CSQTFLANGE CONNECTING FACILITY AND QUANTITY4 THREADED HOLE SINGLE FLANGE ALL CONNECTION FACILITIES
CTCJFLANGE STYLECHOKE TYPE SINGLE FLANGE
CWBQADAPTER OVERALL HEIGHT1.832 INCHES NOMINAL
CXBHADAPTER OVERALL WIDTH1.625 INCHES NOMINAL
MATTMATERIALALUMINUM SINGLE TUBING SEGMENT AND FLANGE
MATTMATERIALSTEEL SINGLE COUPLING
SFTTSURFACE TREATMENTPAINT SINGLE TUBING SEGMENT AND FLANGE OUTSIDE SURFACES
STYLSTYLE DESIGNATORWAVEGUIDE TO COAXIAL
THSDTHREAD SERIES DESIGNATORUNC SINGLE FLANGE ALL CONNECTION FACILITIES

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control 7
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063520 - Waveguide in boxes/crates
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 723 - Radio parts and equipment, excluding tubes packed separately

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top