Buy MR1057 Motor Alternating C part by Mil Spec Inc

Part Number: MR1057

Manufacturer: mil spec inc

NSN: 6105-01-357-9749

NIIN: 013579749

Item Name : motor alternating c

CAGE Code: 57368

FSC: 6105 Motors Electrical

INC Code: 00530

Country: USA

NCB Code: 01

FSG: 61 Electric Wire and Power and Distribution Equipment

We've received your request for MR1057 (described as Motor Alternating C), manufactured by Mil Spec Inc with CAGE code 57368. This part is registered under NSN 6105-01-357-9749, classified in FSG 61 Electric Wire and Power and Distribution Equipment / FSC 6105 Motors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-357-9749, NCB code 01 (origin: USA), and INC 00530. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MR1057 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MR1057

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MR1057, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MR1057 with NSN 6105-01-357-9749, 6105013579749

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
6105-01-357-9749 Item PartTypeName: MOTOR,ALTERNATING CURRENT	6105	013579749	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
89D0005 ITEM 70	5	1	5

Characteristics Data of NSN 6105-01-357-9749, 6105013579749

MRC	Criteria	Characteristic
AAJV	OVERALL WIDTH	9.000 INCHES
ABRR	KEYWAY WIDTH	0.250 INCHES NOMINAL SINGLE END
ABRV	KEYWAY DEPTH	0.250 INCHES NOMINAL SINGLE END
AKCT	SHAFT ROTATION DIRECTION	COUNTERCLOCKWISE SINGLE END
AKPS	DUTY CYCLE	CONTINUOUS
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE
BTBY	SHAFT END STYLE	FLAT KEYWAY SINGLE END
CNXS	POWER RATING	1.500 HORSEPOWER OUTPUT
FAAZ	PHASE	THREE INPUT
FREQ	FREQUENCY IN HERTZ	60.0 INPUT
ABWV	SHAFT DIAMETER	1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM SINGLE END
CNMM	FRAME SIZE DESIGNATION	182T
CWDT	NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	4.500 INCHES
CWFX	ROTOR SPEED RATING IN RPM	1800.0 SINGLE FULL LOAD
TTQY	TERMINAL TYPE AND QUANTITY	3 SOLDERLESS LUG
AAJU	OVERALL LENGTH	12.750 INCHES
BKPB	CURRENT RATING METHOD	LOAD
CRTL	CRITICALITY CODE JUSTIFICATION	FEAT
CWDY	TEMP RATING	50.0 AMBIENT DEG CELSIUS
CWGQ	CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	440.0 LINE TO NEUTRAL SINGLE INPUT
FEAT	SPECIAL FEATURES	MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
AAJT	OVERALL HEIGHT	9.500 INCHES
AFYS	KEYWAY LENGTH	1.880 INCHES NOMINAL SINGLE END
ANPZ	ENCLOSURE FEATURE	DRIPPROOF-15 DEG
AXCP	WINDING TYPE	INDUCTION-SQUIRREL CAGE
AXGY	MOUNTING METHOD	FIXED BASE
CWCS	LENGTH OF SHAFT FROM HOUSING	9.500 INCHES SINGLE END
CWFY	NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	7.500 INCHES
CWGL	CURRENT RATING IN AMPS	2.500 SINGLE INPUT

Schedule B & Trade

End Use : 20000	Generators, accessories
Schedule B : 8501524000 (NAICS 335312)	Ac motors, multi-phase, exceeding 750 w but not exceeding 14.92 kw
SITC : 71631	Electric motors of an output exceeding 37.5 w (including universal ac/dc motors), ac

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	3bvm--y
Quantity per pack	1
Repariability	When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)