Buy MS25008-1 Switch Sensitive part by Military Specifications

Part Number: MS25008-1

Alternate P/N: MS250081

Manufacturer: military specifications

NSN: 5930-00-504-6094

NIIN: 005046094

Item Name : switch sensitive

CAGE Code: 81349

FSC: 5930 Switches

INC Code: 00399

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for MS25008-1 (described as Switch Sensitive), manufactured by Military Specifications with CAGE code 81349. This part is registered under NSN 5930-00-504-6094, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 00-504-6094, NCB code 00 (origin: USA), and INC 00399. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS25008-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS25008-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS25008-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS25008-1 with NSN 5930-00-504-6094, 5930005046094

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5930-00-504-6094 Item PartTypeName: SWITCH,SENSITIVE	5930	005046094	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
081DT2RA700-0000	5	1	C			A

Characteristics Data of NSN 5930-00-504-6094, 5930005046094

MRC	Criteria	Characteristic
AAQL	BODY STYLE	HOLE MOUNTED
ABFE	HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	DUSTPROOF
ABHP	OVERALL LENGTH	1.950 INCHES MAXIMUM
ABKQ	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	1.275 INCHES NOMINAL
ABMK	OVERALL WIDTH	0.700 INCHES MAXIMUM
ADAQ	BODY LENGTH	1.950 INCHES MAXIMUM
ADAT	BODY WIDTH	0.700 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.920 INCHES MAXIMUM
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.139 INCHES MINIMUM AND 0.142 INCHES MAXIMUM
AFUQ	ACTUATOR STYLE	ROUND
AFUR	ACTUATOR DIAMETER	0.094 INCHES NOMINAL
AFUS	ACTUATOR HEIGHT	0.112 INCHES NOMINAL
AFUU	ACTUATOR FREE POSITION HEIGHT	0.600 INCHES MINIMUM AND 0.630 INCHES MAXIMUM
AFXE	MAXIMUM VOLTAGE RATING IN VOLTS	28.0 DC
AGAV	END ITEM IDENTIFICATION	HELICOPTER IROQUOIS UH-1
AKNA	INCLOSURE TYPE	UNINCLOSED
AXGY	MOUNTING METHOD	UNTHREADED HOLE
CRLD	NONPILE-UP CONTACT ARRANGEMENT	2 POLE,DOUBLE THROW,ONE POSITION MOMENTARY SINGLE SWITCH UNIT
CRRM	SWITCH RELEASE FORCE	2.0 OUNCES MINIMUM
CSJN	SWITCH ACTUATING FORCE	20.0 OUNCES MAXIMUM
CWJK	CASE MATERIAL	PLASTIC
CXQQ	ACTUATOR MOVEMENT	0.085 PRETRAVEL INCHES MAXIMUM
CXQR	CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	10.000 AMPERES RESISTIVE DC AND 5.000 AMPERES INDUCTIVE DC AND 5.000 AMPERES MOTOR DC
TEST	TEST DATA DOCUMENT	81349-MIL-S-8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN
TTQY	TERMINAL TYPE AND QUANTITY	6 SCREW
ZZZK	SPECIFICATION/STANDARD DATA	96906-MS25008 GOVERNMENT STANDARD

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8536509050 (NAICS 335931)	Switches, slide, for a voltage not exceeding 1, 000 v
SITC : 77255	Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061300 - Circuit breaker/switch noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components