Buy M20708/79-01C Synchro Control Tra part by Military Specifications

Part Number: M20708/79-01C

Alternate P/N: M20708/7901C

Manufacturer: military specifications

NSN: 5990-00-881-1031

NIIN: 008811031

Item Name : synchro control tra

CAGE Code: 81349

FSC: 5990 Synchros and Resolvers

INC Code: 15289

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for M20708/79-01C (described as Synchro Control Tra), manufactured by Military Specifications with CAGE code 81349. This part is registered under NSN 5990-00-881-1031, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-881-1031, NCB code 00 (origin: USA), and INC 15289. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your M20708/79-01C requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M20708/79-01C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part M20708/79-01C, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number M20708/79-01C with NSN 5990-00-881-1031, 5990008811031

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-881-1031 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER	5990	008811031	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
138A916001	1	1	C			A

Characteristics Data of NSN 5990-00-881-1031, 5990008811031

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAQL	BODY STYLE	STANDARD ROUND A
AAVL	PILOT DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.5920 INCHES NOMINAL
ABKK	FLANGE DIAMETER	0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0620 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.6870 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.0898 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3520 INCHES NOMINAL SINGLE SHAFT
AHCG	MAXIMUM TEMP RISE	10.0 DEG CELSIUS
AJSL	BODY SIZE	8
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	23.0 MILLIAMPERES MAXIMUM
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	44.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJTG	ZRO IMPEDANCE MAGNITUDE IN OHMS	830.00 MINIMUM AND 940.00 MAXIMUM
AJTH	ZRO IMPEDANCE ANGLE IN DEG	16.00 MINIMUM AND 20.00 MAXIMUM
AJTJ	ZSO IMPEDANCE MAGNITUDE IN OHMS	444.00 MINIMUM AND 570.00 MAXIMUM
AJTK	ZSO IMPEDANCE ANGLE IN DEG	76.00 MINIMUM AND 81.00 MAXIMUM
AJVF	PHASE SHIFT ANGLE IN DEG	8.000 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	25.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	30.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-7.0 TO 7.0
AJVV	TORQUE GRADIENT PER ANGULAR DEG	0.040 INCH-OUNCES MAXIMUM
AJWQ	PILOT LENGTH	0.0400 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2400 INCHES MAXIMUM
CQTM	TERMINAL LOCATION	REAR
CQZS	SHAFT SLOT DEPTH	0.0250 INCHES NOMINAL SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.0200 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	2.203 ROTOR TO STATOR NOMINAL
TEST	TEST DATA DOCUMENT	81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-S-20708/79 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	12b2---
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)