Buy 11CX4E Synchro Transmitter part by Military Specifications

Part Number: 11CX4E

Manufacturer: military specifications

NSN: 5990-00-912-9166

NIIN: 009129166

Item Name : synchro transmitter

CAGE Code: 81349

FSC: 5990 Synchros and Resolvers

INC Code: 02073

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 11CX4E (described as Synchro Transmitter), manufactured by Military Specifications with CAGE code 81349. This part is registered under NSN 5990-00-912-9166, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-912-9166, NCB code 00 (origin: USA), and INC 02073. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 11CX4E requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 11CX4E

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 11CX4E, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 11CX4E with NSN 5990-00-912-9166, 5990009129166

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-912-9166 Item PartTypeName: SYNCHRO,TRANSMITTER	5990	009129166	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11CX200B1-3	C	2	5

Characteristics Data of NSN 5990-00-912-9166, 5990009129166

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND B
AAVH	SHOULDER DIAMETER	1.0000 INCHES NOMINAL
AAVL	PILOT DIAMETER	0.6250 INCHES NOMINAL
ABHP	OVERALL LENGTH	2.2670 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0620 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.0620 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1872 INCHES NOMINAL SINGLE SHAFT
ABXF	SHAFT LENGTH	0.5000 INCHES NOMINAL SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSL	BODY SIZE	11
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	30.0 MILLIAMPERES NOMINAL
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	510.0 MILLIWATTS NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	3720.00 NOMINAL
AJTC	ZSS RESISTANCE IN OHMS	410.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	4.500 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	45.00 INPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	75.00
AJVM	SPLINE TOOTH QUANTITY	21 SINGLE SHAFT
AJVV	TORQUE GRADIENT PER ANGULAR DEG	0.700 INCH-OUNCES MINIMUM
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0930 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7320 INCHES MAXIMUM
AJXA	SPLINE TOOTH DIAMETRAL PITCH	120 SINGLE SHAFT
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	2A SINGLE SHAFT
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQWQ	SHAFT THREAD LENGTH	0.2950 INCHES NOMINAL SINGLE SHAFT
CQXQ	PLUS J ZRO REACTANCE IN OHMS	4700.00 NOMINAL
CRSJ	SHAFT TYPE	SPLINE W/THREADS SINGLE SHAFT
CSFG	PLUS J ZSS REACTANCE IN OHMS	500.00 NOMINAL
CSJY	TRANSFORMATION RATIO	0.783 ROTOR TO STATOR NOMINAL
CWBH	SHAFT NOMINAL THREAD SIZE	0.1850 INCHES SINGLE SHAFT
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Y
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)