Buy MS90726-111 Screw Cap Hexagon H part by Military Standards Corp

Part Number: MS90726-111

Alternate P/N: MS90726111

Manufacturer: military standards corp

NSN: 5305-00-761-4227

NIIN: 007614227

Item Name : screw cap hexagon h

CAGE Code: 96906

FSC: 5305 Screws

INC Code: 18257

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS90726-111 (described as Screw Cap Hexagon H), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5305-00-761-4227, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-761-4227, NCB code 00 (origin: USA), and INC 18257. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS90726-111 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS90726-111

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS90726-111, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS90726-111 with NSN 5305-00-761-4227, 5305007614227

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-00-761-4227 Item PartTypeName: SCREW,CAP,HEXAGON HEAD	5305	007614227	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
13218E0528-722	1	2	5

Characteristics Data of NSN 5305-00-761-4227, 5305007614227

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	1.250 INCHES MAXIMUM
AASB	FASTENER LENGTH	1.250 INCHES NOMINAL
AASK	HEAD STYLE	HEXAGON
CQFM	HARDNESS RATING	23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
CQHQ	MINIMUM YIELD STRENGTH	85000 POUNDS PER SQUARE INCH
MATT	MATERIAL	STEEL OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNF
AASU	HEAD HEIGHT	0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
AATB	WIDTH BETWEEN FLATS	0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.500 INCHES
CMLP	THREAD QUANTITY PER INCH	20
CQBC	MINIMUM TENSILE STRENGTH	120000 POUNDS PER SQUARE INCH
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL