Buy MS51975-8 Screw Shoulder part by Military Standards Corp

Part Number: MS51975-8

Alternate P/N: MS519758

Manufacturer: military standards corp

NSN: 5305-00-914-3818

NIIN: 009143818

Item Name : screw shoulder

CAGE Code: 96906

FSC: 5305 Screws

INC Code: 22846

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS51975-8 (described as Screw Shoulder), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5305-00-914-3818, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-914-3818, NCB code 00 (origin: USA), and INC 22846. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS51975-8 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS51975-8

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS51975-8, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS51975-8 with NSN 5305-00-914-3818, 5305009143818

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-00-914-3818 Item PartTypeName: SCREW,SHOULDER	5305	009143818	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10386527	5	9	6

Characteristics Data of NSN 5305-00-914-3818, 5305009143818

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.418 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.923 INCHES MINIMUM AND 0.933 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT CHAMFER
AASL	HEAD DIAMETER	0.419 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
AASU	HEAD HEIGHT	0.209 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
AATN	SHOULDER DIAMETER	0.3085 INCHES MINIMUM AND 0.3105 INCHES MAXIMUM FIRST SHOULDER
AATX	SHOULDER LENGTH	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM FIRST SHOULDER
ABQZ	INTERNAL DRIVE STYLE	HEXAGON
AGAV	END ITEM IDENTIFICATION	MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ASDB	WIDTH ACROSS FLATS	0.156 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	20
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
CWYB	SHOULDER SHAPE	ROUND FIRST SHOULDER
MATT	MATERIAL	STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNC