Buy MS51992C643-18 Stud Locked In part by Military Standards Corp

Part Number: MS51992C643-18

Alternate P/N: MS51992C64318

Manufacturer: military standards corp

NSN: 5307-01-136-1814

NIIN: 011361814

Item Name : stud locked in

CAGE Code: 96906

FSC: 5307 Studs

INC Code: 16012

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MS51992C643-18 (described as Stud Locked In), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5307-01-136-1814, classified in FSG 53 Hardware and Abrasives / FSC 5307 Studs. Our verification process will confirm traceability through supporting identifiers including NIIN 01-136-1814, NCB code 01 (origin: USA), and INC 16012. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS51992C643-18 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS51992C643-18

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS51992C643-18, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS51992C643-18 with NSN 5307-01-136-1814, 5307011361814

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5307-01-136-1814 Item PartTypeName: STUD,LOCKED IN	5307	011361814	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10116413	2	9	6

Characteristics Data of NSN 5307-01-136-1814, 5307011361814

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A NUT THREAD
AAJE	THREAD PITCH DIAMETERS	0.3497 TO 0.3512 INCHES STUD THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND NUT THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND STUD THREAD
AASA	THREAD LENGTH	0.381 INCHES MINIMUM AND 0.451 INCHES MAXIMUM STUD THREAD
AASA	THREAD LENGTH	0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM NUT THREAD
AAUM	LOCKING FEATURE	RING,LOCK SERRATED
ABHP	OVERALL LENGTH	1.648 INCHES MINIMUM AND 1.718 INCHES MAXIMUM
ADCT	DISTANCE FROM SERRATED PORTION TO NUT END	1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM
ADCU	DISTANCE FROM SERRATED PORTION TO STUD END	0.538 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
ADCX	DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD	0.127 INCHES MINIMUM AND 0.157 INCHES MAXIMUM
ADDW	SERRATION QUANTITY	17
CMLP	THREAD QUANTITY PER INCH	24 STUD THREAD
CMLP	THREAD QUANTITY PER INCH	28 NUT THREAD
CQFM	HARDNESS RATING	277.0 BRINELL STANDARD MINIMUM
CQJX	NOMINAL THREAD SIZE	0.250 INCHES NUT THREAD
CQJX	NOMINAL THREAD SIZE	0.375 INCHES STUD THREAD
CSYM	SURFACE FINISH	32.0 MICROINCHES NUT THD
CSYM	SURFACE FINISH	63.0 MICROINCHES SHANK
CWKL	SERRATION INCLUDED ANGLE	85.0 DEGREES MINIMUM AND 87.0 DEGREES MAXIMUM
MATT	MATERIAL	IRON ALLOY 660
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	LOCKED IN
THSD	THREAD SERIES DESIGNATOR	UNJF NUT THREAD
THSD	THREAD SERIES DESIGNATOR	UNS STUD THREAD

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	100
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)