Buy MS21078-6 Nut Self Locking Pl part by Military Standards Corp

Part Number: MS21078-6

Alternate P/N: MS210786

Manufacturer: military standards corp

NSN: 5310-00-728-5521

NIIN: 007285521

Item Name : nut self locking pl

CAGE Code: 96906

FSC: 5310 Nuts and Washers

INC Code: 05280

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS21078-6 (described as Nut Self Locking Pl), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5310-00-728-5521, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-728-5521, NCB code 00 (origin: USA), and INC 05280. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS21078-6 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS21078-6

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS21078-6, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS21078-6 with NSN 5310-00-728-5521, 5310007285521

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-728-5521 Item PartTypeName: NUT,SELF-LOCKING,PLATE	5310	007285521	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
7F42NA1-624	3	9	5

Characteristics Data of NSN 5310-00-728-5521, 5310007285521

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ABTB	MOUNTING HOLE DIAMETER	0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
ACVN	NUT LENGTH	1.296 INCHES MAXIMUM
ADFW	DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
AZKQ	TEMP RATING	250.0 DEG FAHRENHEIT NOMINAL
CQFM	HARDNESS RATING	32.0 ROCKWELL C MAXIMUM
CRSQ	COUNTERSINK ANGLE	88.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM NUT
MATT	MATERIAL	PLASTIC POLYAMIDE LOCKING INSERT
MATT	MATERIAL	STEEL NUT
SFTT	SURFACE TREATMENT	CADMIUM OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
AAUM	LOCKING FEATURE	PREVAILING TORQUE WITH NONMETALLIC INSERT
ACTA	NUT STYLE	PLATE
ADEA	NUT HEIGHT	0.318 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
ADEB	PLATE THICKNESS	0.115 INCHES MAXIMUM
ADEC	PLATE WIDTH	0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
ADFP	NUT MOUNTING PROVISION	STRAIGHT HOLES
ADFU	MOUNTING HOLE ARRANGEMENT STYLE	2 HOLES
ADFY	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
BZRR	THREAD SERIES	UNJF
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.375 INCHES

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7318160000 (NAICS 332722)	Nuts of iron or steel
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	10
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)