Buy MS20426AD5-4-5 Rivet Solid part by Military Standards Corp

Part Number: MS20426AD5-4-5

Alternate P/N: MS20426AD545

Manufacturer: military standards corp

NSN: 5320-01-190-9121

NIIN: 011909121

Item Name : rivet solid

CAGE Code: 96906

FSC: 5320 Rivets

INC Code: 00861

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MS20426AD5-4-5 (described as Rivet Solid), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5320-01-190-9121, classified in FSG 53 Hardware and Abrasives / FSC 5320 Rivets. Our verification process will confirm traceability through supporting identifiers including NIIN 01-190-9121, NCB code 01 (origin: USA), and INC 00861. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS20426AD5-4-5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS20426AD5-4-5

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS20426AD5-4-5, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS20426AD5-4-5 with NSN 5320-01-190-9121, 5320011909121

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-01-190-9121 Item PartTypeName: RIVET,SOLID	5320	011909121		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MS20426AD5-4-5	5	2	3

Characteristics Data of NSN 5320-01-190-9121, 5320011909121

MRC	Criteria	Characteristic
AASB	FASTENER LENGTH	0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
AASK	HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER)
AAZE	SHANK DIAMETER	0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
AAZF	SHANK STYLE	STRAIGHT W/RADIUS CHAMFERED TIP
AAZG	HEAD MAJOR DIAMETER	0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
CQSX	SHEAR STRENGTH	26000 SINGLE POUNDS PER SQUARE INCH
CRSQ	COUNTERSINK ANGLE	99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
HEAT	HEAT TREATMENT	T-4 SOLUTION HEAT TREATED OVERALL
MATT	MATERIAL	ALUMINUM ALLOY 2117 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	ANODIZE OR CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7616103000 (NAICS 332722)	Aluminum rivets
SITC : 69440	Nails, tacks, staples (excluding staples in strips for office etc. Use), screws, bolts, nuts, rivets, washers and similar articles, of aluminum

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown