Buy MS29561-034 O-Ring part by Military Standards Corp

Part Number: MS29561-034

Alternate P/N: MS29561034

Manufacturer: military standards corp

NSN: 5331-01-202-4984

NIIN: 012024984

Item Name : o-ring

CAGE Code: 96906

FSC: 5331 O-Ring

INC Code: 47946

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MS29561-034 (described as O-Ring), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5331-01-202-4984, classified in FSG 53 Hardware and Abrasives / FSC 5331 O-Ring. Our verification process will confirm traceability through supporting identifiers including NIIN 01-202-4984, NCB code 01 (origin: USA), and INC 47946. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS29561-034 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS29561-034

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS29561-034, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS29561-034 with NSN 5331-01-202-4984, 5331012024984

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5331-01-202-4984 Item PartTypeName: O-RING	5331	012024984		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2-034 N4771-70	5	9	5

Characteristics Data of NSN 5331-01-202-4984, 5331012024984

MRC	Criteria	Characteristic
ABJH	TEMP RATING	-60.0 DEG FAHRENHEIT AND 180.0 DEG FAHRENHEIT
ADVN	CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
ADYT	CENTER HOLE DIAMETER	2.096 INCHES MINIMUM AND 2.132 INCHES MAXIMUM
ADYU	PERIPHERAL DIAMETER	2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM
CQFM	HARDNESS RATING	65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
MATT	MATERIAL	RUBBER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-7362 TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE

Schedule B & Trade

End Use : 12770	Other industrial supplies
Schedule B : 3926904500 (NAICS 339991)	Gaskets, washers & other seals
SITC : 89399	Articles of plastics, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown