Buy MK-210 115VAC 12VDC Charger Battery part by Minn Kota Motors

Part Number:  MK-210 115VAC 12VDC
Alternate P/N:  MK210115VAC12VDC
Manufacturer:  minn kota motors
NIIN:  015916196
Item Name :  charger battery
CAGE Code:  4ED15
INC Code:  00480
Country:  USA
NCB Code:  01
FSG:  61 Electric Wire and Power and Distribution Equipment

We've received your request for MK-210 115VAC 12VDC (described as Charger Battery), manufactured by Minn Kota Motors with CAGE code 4ED15. This part is registered under NSN 6130-01-591-6196, classified in FSG 61 Electric Wire and Power and Distribution Equipment / FSC 6130 Converters Electrical Non Rotating. Our verification process will confirm traceability through supporting identifiers including NIIN 01-591-6196, NCB code 01 (origin: USA), and INC 00480. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MK-210 115VAC 12VDC requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MK-210 115VAC 12VDC

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part MK-210 115VAC 12VDC, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MK-210 115VAC 12VDC with NSN 6130-01-591-6196, 6130015916196

NSNFSCNIINCLSHazmatDEMILCancelled NSN
6130-01-591-6196

Item PartTypeName:

CHARGER,BATTERY

6130015916196NA
CIICHCCESDPMICCriticalityENAC
AA0
Part NumberISCRNVCRNCCHCCMSDSSADC
MK-210 115VAC/12VDC523

Characteristics Data of NSN 6130-01-591-6196, 6130015916196

MRCCriteriaCharacteristic
ABFYOVERALL DEPTH7.500 INCHES NOMINAL
ABKWOVERALL HEIGHT4.000 INCHES NOMINAL
ABMKOVERALL WIDTH11.500 INCHES NOMINAL
ACYNAC VOLTAGE RATING115.0 VOLTS MAXIMUM
ACYRDC VOLTAGE RATING12.0 VOLTS MAXIMUM
AKWLCHARGING VOLTAGE IN VOLTS12.0 NOMINAL
AKWMCHARGING CURRENT RATING IN AMPS5.000 NOMINAL
FEATSPECIAL FEATURESAUTOMATIC 3-STAGE CHARGING , AUTOMATIC TEMPERATURE COMPENSATION, USE WITH 12/6 CELL BATTERIES , 20-105 AMP HOUR RATING , SHORT CIRCUIT , REVERSE POLARITY AND IGNITION PROTECTED , 2 BANKS , AMP OUTPUT: 5 , TOTAL AMP OUTPUT: 10

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8502400000 (NAICS 335312) Electric rotary converters
SITC : 71640 Electric rotary converters

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top