Buy 6306-1J Microcircuit Memory part by Mmi Amd

Part Number:  6306-1J
Alternate P/N:  63061J
Manufacturer:  mmi amd
NIIN:  010399421
Item Name :  microcircuit memory
CAGE Code:  50364
INC Code:  41015
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 6306-1J (described as Microcircuit Memory), manufactured by Mmi Amd with CAGE code 50364. This part is registered under NSN 5962-01-039-9421, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5962 Microcircuits Electronic. Our verification process will confirm traceability through supporting identifiers including NIIN 01-039-9421, NCB code 01 (origin: USA), and INC 41015. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 6306-1J requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 6306-1J

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 6306-1J, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 6306-1J with NSN 5962-01-039-9421, 5962010399421

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-01-039-9421

Item PartTypeName:

MICROCIRCUIT,MEMORY

59620103994210NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
278539-52223

Characteristics Data of NSN 5962-01-039-9421, 5962010399421

MRCCriteriaCharacteristic
ADAQBODY LENGTH0.750 INCHES MINIMUM AND 0.795 INCHES MAXIMUM
ADATBODY WIDTH0.245 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
ADAUBODY HEIGHT0.120 INCHES MINIMUM AND 0.195 INCHES MAXIMUM
AEHXMAXIMUM POWER DISSIPATION RATING625.0 MILLIWATTS
AFGAOPERATING TEMP RANGE0.0 TO 75.0 DEG CELSIUS
AFJQSTORAGE TEMP RANGE-65.0 TO 150.0 DEG CELSIUS
AGAVEND ITEM IDENTIFICATIONCHEYENNE AIRCRAFT MODEL 427M
CBBLFEATURES PROVIDEDBIPOLAR AND HERMETICALLY SEALED AND HIGH SPEED AND MONOLITHIC AND POSITIVE OUTPUTS AND PROGRAMMABLE AND PROGRAMMED AND W/BUFFERED OUTPUT AND W/DECODED OUTPUT AND W/DISABLE AND W/ENABLE AND W/STORAGE AND 3-STATE OUTPUT
CQSJINCLOSURE MATERIALCERAMIC AND GLASS
CQSZINCLOSURE CONFIGURATIONDUAL-IN-LINE
CQWXOUTPUT LOGIC FORMTRANSISTOR-TRANSISTOR LOGIC
CQZPINPUT CIRCUIT PATTERN10 INPUT
CTFTCASE OUTLINE SOURCE AND DESIGNATOR-0.001-AG JOINT ELECTRON DEVICE ENGINEERING COUNCIL
CWSGTERMINAL SURFACE TREATMENTSOLDER
CZENVOLTAGE RATING AND TYPE PER CHARACTERISTIC5.5 VOLTS MAXIMUM POWER SOURCE
CZEQTIME RATING PER CHACTERISTIC30.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,LOW TO HIGH LEVEL OUTPUT AND 30.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,HIGH TO LOW LEVEL OUTPUT
CZERMEMORY DEVICE TYPEROM
CZZZMEMORY CAPACITYUNKNOWN
TESTTEST DATA DOCUMENT11530-278539 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY16 PRINTED CIRCUIT

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8542900000 (NAICS 334413) Electronic integrated circuits and microassembly parts
SITC : 77689 Parts of electronic integrated circuits and microassembles

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top