Buy EDH10AS1 Synchro Differentia part by Moog Inc

Part Number: EDH10AS1

Manufacturer: moog inc

NSN: 5990-00-945-3518

NIIN: 009453518

Item Name : synchro differentia

CAGE Code: 99932

FSC: 5990 Synchros and Resolvers

INC Code: 02071

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for EDH10AS1 (described as Synchro Differentia), manufactured by Moog Inc with CAGE code 99932. This part is registered under NSN 5990-00-945-3518, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-945-3518, NCB code 00 (origin: USA), and INC 02071. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your EDH10AS1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for EDH10AS1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part EDH10AS1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number EDH10AS1 with NSN 5990-00-945-3518, 5990009453518

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-945-3518 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER	5990	009453518		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
EDH10AS1	2	2	3

Characteristics Data of NSN 5990-00-945-3518, 5990009453518

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.8260 INCHES NOMINAL
ABKK	FLANGE DIAMETER	0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0630 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.8400 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3750 INCHES NOMINAL SINGLE SHAFT
AJSL	BODY SIZE	10
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	80.0 MILLIAMPERES NOMINAL
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	190.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	34.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	29.00 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	40.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	32.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	25.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	8.500 INPUT TO OUTPUT NOMINAL
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	30.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-7.5 TO 7.5
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.00 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.00 CENTIMETER-GRAMS MAXIMUM
AJVW	ALIGNMENT HOLE QUANTITY	3
AJWQ	PILOT LENGTH	0.0380 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2810 INCHES MAXIMUM
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	119.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0300 INCHES NOMINAL SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	124.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0200 INCHES NOMINAL SINGLE SHAFT
CRKL	PLUS J ZRS REACTANCE IN OHMS	12.70 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.0500 INCHES MAXIMUM
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.6780 INCHES NOMINAL
TTQY	TERMINAL TYPE AND QUANTITY	6 SOLDER STUD

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	Q - 70.0
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	590 - Generators and parts, (machinery and parts),(less than 35 feet)