Buy BLC-11-DF-05 B068 Resolver Electrical part by Moog Inc

Part Number:  BLC-11-DF-05 B068
Alternate P/N:  BLC11DF05B068
Manufacturer:  moog inc
NIIN:  008244133
Item Name :  resolver electrical
CAGE Code:  99932
INC Code:  31780
Country:  USA
NCB Code:  00

We've received your request for BLC-11-DF-05 B068 (described as Resolver Electrical), manufactured by Moog Inc with CAGE code 99932. This part is registered under NSN 5990-00-824-4133, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-824-4133, NCB code 00 (origin: USA), and INC 31780. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your BLC-11-DF-05 B068 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BLC-11-DF-05 B068

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part BLC-11-DF-05 B068, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number BLC-11-DF-05 B068 with NSN 5990-00-824-4133, 5990008244133

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5990-00-824-4133

Item PartTypeName:

RESOLVER,ELECTRICAL,LINEAR

59900082441330N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
579R709H04623

Characteristics Data of NSN 5990-00-824-4133, 5990008244133

MRCCriteriaCharacteristic
AAQLBODY STYLESTANDARD ROUND C
AAVLPILOT DIAMETER0.6250 INCHES MAXIMUM
AJSTROTOR INPUT CURRENT RATING3.0 MILLIAMPERES MAXIMUM
AJSVROTOR INPUT ELECTRICAL POWER RATING220.0 MILLIWATTS MAXIMUM
AJSWZRO RESISTANCE IN OHMS1535.00 NOMINAL
AJSYZSO RESISTANCE IN OHMS975.00 NOMINAL
AJTSROTOR DC RESISTANCE IN OHMS610.00 NOMINAL
AJTTSTATOR DC RESISTANCE IN OHMS930.00 NOMINAL
AJVFPHASE SHIFT ANGLE IN DEG2.500 INPUT TO OUTPUT NOMINAL
AJVHMAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT20.00
AJVQLINEARITY IN PERCENT0.866
AJWESHAFT RADIAL PLAY TEST POINT0.125 INCHES MAXIMUM
AJWGSHAFT MAXIMUM RADIAL PLAY0.0010 INCHES
AJWHSHAFT END PLAY0.0020 INCHES MAXIMUM
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE1.8350 INCHES MAXIMUM
CQXQPLUS J ZRO REACTANCE IN OHMS9160.00 NOMINAL
CRGZPLUS J ZSO REACTANCE IN OHMS1780.00 NOMINAL
CRSJSHAFT TYPEROUND,FLATTED SINGLE SHAFT
CTJKSHAFT FLATTED PORTION THICKNESS0.1050 INCHES NOMINAL SINGLE SHAFT
CWYFSHAFT END PLAY DETERMINING WEIGHT16.0 OUNCES
TTQYTERMINAL TYPE AND QUANTITY4 TAB,SOLDER LUG
AAFZBODY MATERIALSTEEL,STAINLESS
AAVHSHOULDER DIAMETER1.0000 INCHES MAXIMUM
ABHPOVERALL LENGTH2.6000 INCHES MAXIMUM
ABKKFLANGE DIAMETER1.0620 INCHES MAXIMUM
ABKUFLANGE THICKNESS0.0930 INCHES NOMINAL
ABPAUNDERCUT DIAMETER0.9750 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0500 INCHES NOMINAL
ABWVSHAFT DIAMETER0.1247 INCHES MAXIMUM SINGLE SHAFT
ABXFSHAFT LENGTH0.6000 INCHES MAXIMUM SINGLE SHAFT
AEBZSCHEMATIC DIAGRAM DESIGNATOR1 ROTOR,1 STATOR
AFJNFRAGILITY FACTORMODERATELY RUGGED
AJSLBODY SIZE11
AJSRROTOR INPUT VOLTAGE RATING IN VOLTS26.0 NOMINAL
AJSSFREQUENCY IN HERTZ400.0 NOMINAL
AJVPMAXIMUM LINEAR RANGE IN DEG-50.0 TO 50.0
AJVROUTPUT VOLTAGE CHANGE PER DEG IN VOLTS0.346
AJVSACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS9.0 CENTIMETER-GRAMS MAXIMUM
AJVTACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS3.0 CENTIMETER-GRAMS MAXIMUM
AJWQPILOT LENGTH0.0620 INCHES NOMINAL
AJWRSHOULDER LENGTH0.0620 INCHES NOMINAL
AJXBSHAFT MAXIMUM RUNOUT0.0010 INCHES
CQTMTERMINAL LOCATIONREAR
CWFMSHAFT FLATTED PORTION LENGTH0.5380 INCHES NOMINAL SINGLE SHAFT
CWXKSHAFT RADIAL PLAY DETERMINING WEIGHT4.0 OUNCES

Schedule B & Trade

End Use : 21610 Medicinal equipment
Schedule B : 9018903000 (NAICS 339112) Anesthetic instruments and appliances and parts and accessories
SITC : 87229 Instruments and appliances used in medical, surgical or veterinary sciences, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 062120 - Generators/motors/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 593 - Motors and parts, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top