Buy BQC-11-BZS-01 A675 Resolver Electrical part by Moog Inc

Part Number: BQC-11-BZS-01 A675

Alternate P/N: BQC11BZS01A675

Manufacturer: moog inc

NSN: 5990-00-959-8280

NIIN: 009598280

Item Name : resolver electrical

CAGE Code: 99932

INC Code: 22966

Country: USA

NCB Code: 00

We've received your request for BQC-11-BZS-01 A675 (described as Resolver Electrical), manufactured by Moog Inc with CAGE code 99932. This part is registered under NSN 5990-00-959-8280, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-959-8280, NCB code 00 (origin: USA), and INC 22966. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your BQC-11-BZS-01 A675 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BQC-11-BZS-01 A675

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part BQC-11-BZS-01 A675, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number BQC-11-BZS-01 A675 with NSN 5990-00-959-8280, 5990009598280

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-959-8280 Item PartTypeName: RESOLVER,ELECTRICAL	5990	009598280	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
900131-0020	C	2	3

Characteristics Data of NSN 5990-00-959-8280, 5990009598280

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	1.0000 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6250 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.5000 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0620 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0450 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1195 INCHES NOMINAL SINGLE SHAFT
ABXF	SHAFT LENGTH	0.4750 INCHES NOMINAL SINGLE SHAFT
AJSL	BODY SIZE	11
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	22.0 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	5.2 MILLIAMPERES MAXIMUM
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	10.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	400.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	360.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	330.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	305.00 NOMINAL
AJTW	TRANSFORMATION RATIO EQUALITY IN PERCENT	0.04 NOMINAL
AJTX	COMPENSATION METHOD	WINDING COMPENSATED
AJTY	ZCO RESISTANCE IN OHMS	415.00 NOMINAL
AJVC	COMPENSATOR DC RESISTANCE IN OHMS	350.00 NOMINAL
AJVD	COMPENSATOR TRANSFORMATION RATIO IN PERCENT	1.0007 ROTOR TO COMPENSATOR NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	8.500 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	8.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	10.00
AJVJ	INTERAXIS ERROR ANGULAR RANGE IN MINUTES	-3.0 TO 3.0
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-2.5 TO 2.5
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS NOMINAL
AJWH	SHAFT END PLAY	0.0015 INCHES MAXIMUM
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.8850 INCHES MAXIMUM
AJXB	SHAFT MAXIMUM RUNOUT	0.0005 INCHES
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	2325.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0310 INCHES NOMINAL SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	2200.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0295 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	0.980 ROTOR TO STATOR NOMINAL
CSPK	PLUS J ZCO REACTANCE IN OHMS	2150.00 NOMINAL
CWYF	SHAFT END PLAY DETERMINING WEIGHT	8.0 OUNCES
TTQY	TERMINAL TYPE AND QUANTITY	12 SCREW

Schedule B & Trade

End Use : 21610	Medicinal equipment
Schedule B : 9018903000 (NAICS 339112)	Anesthetic instruments and appliances and parts and accessories
SITC : 87229	Instruments and appliances used in medical, surgical or veterinary sciences, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)