Buy HDC 11 F 6 B644 Synchro Differentia part by Moog Inc

Part Number: HDC 11 F 6 B644

Manufacturer: moog inc

NSN: 5990-01-348-9812

NIIN: 013489812

Item Name : synchro differentia

CAGE Code: 99932

INC Code: 02071

Country: USA

NCB Code: 01

We've received your request for HDC 11 F 6 B644 (described as Synchro Differentia), manufactured by Moog Inc with CAGE code 99932. This part is registered under NSN 5990-01-348-9812, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-348-9812, NCB code 01 (origin: USA), and INC 02071. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your HDC 11 F 6 B644 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HDC 11 F 6 B644

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part HDC 11 F 6 B644, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number HDC 11 F 6 B644 with NSN 5990-01-348-9812, 5990013489812

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-01-348-9812 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER	5990	013489812	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
HDC-11-F-6/B644	5	9	5

Characteristics Data of NSN 5990-01-348-9812, 5990013489812

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
ABKU	FLANGE THICKNESS	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT
AHCG	MAXIMUM TEMP RISE	125.0 DEG CELSIUS
AJTS	ROTOR DC RESISTANCE IN OHMS	59.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	21.00 NOMINAL
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS MAXIMUM
AJWG	SHAFT MAXIMUM RADIAL PLAY	0.0005 INCHES
AJWH	SHAFT END PLAY	0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AJXB	SHAFT MAXIMUM RUNOUT	0.0010 INCHES
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CRSY	ALIGNMENT HOLE DEPTH	0.0700 INCHES MAXIMUM
TTQY	TERMINAL TYPE AND QUANTITY	6 WIRE LEAD
ABPA	UNDERCUT DIAMETER	0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.5620 INCHES NOMINAL SINGLE SHAFT
AJTA	ZRS RESISTANCE IN OHMS	59.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	1.166 STATOR TO ROTOR NOMINAL
ABHP	OVERALL LENGTH	2.2020 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	0.054 AMPERES NOMINAL
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	0.102 WATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	61.00 NOMINAL
CQXQ	PLUS J ZRO REACTANCE IN OHMS	210.00 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM
AJWQ	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6400 INCHES MAXIMUM
CRKL	PLUS J ZRS REACTANCE IN OHMS	21.00 NOMINAL

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)