Buy 5021M80P01 Bracket Double Angl part by Mtu Aero Engines Gmbh

Part Number: 5021M80P01

Manufacturer: mtu aero engines gmbh

NSN: 5340-00-116-6322

NIIN: 001166322

Item Name : bracket double angl

CAGE Code: D3309

FSC: 5340 Hardware Commercial

INC Code: 20354

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 5021M80P01 (described as Bracket Double Angl), manufactured by Mtu Aero Engines Gmbh with CAGE code D3309. This part is registered under NSN 5340-00-116-6322, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-116-6322, NCB code 00 (origin: USA), and INC 20354. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5021M80P01 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5021M80P01

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 5021M80P01, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 5021M80P01 with NSN 5340-00-116-6322, 5340001166322

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-116-6322 Item PartTypeName: BRACKET,DOUBLE ANGLE	5340	001166322	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
5021M80P01	6	2	8

Characteristics Data of NSN 5340-00-116-6322, 5340001166322

MRC	Criteria	Characteristic
AARN	FABRICATION METHOD	FORMED
ADLK	FIRST LEG LENGTH	0.633 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	0.960 INCHES NOMINAL
AHLH	SECOND LEG END WIDTH	0.560 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
AHLL	FIRST LEG SLOT LENGTH	0.640 INCHES MINIMUM AND 0.680 INCHES MAXIMUM
AHLM	FIRST LEG SLOT WIDTH	0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.430 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
AHLZ	SECOND LEG SLOT LENGTH	0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
AHMA	SECOND LEG SLOT WIDTH	0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
AHPW	FIRST LEG THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHPX	SECOND LEG THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHQA	CENTER SECTION WIDTH	1.080 INCHES NOMINAL
AHQB	CENTER SECTION THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHQN	FIRST LEG WIDTH	1.080 INCHES NOMINAL
AHQP	FIRST LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	CORNER RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE SLOT
AKBU	SECOND LEG STYLE	ANGLE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE SLOT
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	120.0 DEGREES NOMINAL
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	STEEL COMP 321
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	DOUBLE ANGLE

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	Sf9sx-n
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	095190 - Hardware, noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware