Buy P250A8057 Retainer Electron T part by Mutron Corp

Part Number: P250A8057

Manufacturer: mutron corp

NSN: 5960-00-170-4091

NIIN: 001704091

Item Name : retainer electron t

CAGE Code: 00798

FSC: 5960 Electron Tubes and Associated Hardware

INC Code: 16182

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for P250A8057 (described as Retainer Electron T), manufactured by Mutron Corp with CAGE code 00798. This part is registered under NSN 5960-00-170-4091, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5960 Electron Tubes and Associated Hardware. Our verification process will confirm traceability through supporting identifiers including NIIN 00-170-4091, NCB code 00 (origin: USA), and INC 16182. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your P250A8057 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for P250A8057

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part P250A8057, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number P250A8057 with NSN 5960-00-170-4091, 5960001704091

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5960-00-170-4091 Item PartTypeName: RETAINER,ELECTRON TUBE	5960	001704091	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
926C-1	3	1	C			A

Characteristics Data of NSN 5960-00-170-4091, 5960001704091

MRC	Criteria	Characteristic
AARX	INSIDE DIAMETER	1.375 INCHES NOMINAL
ABKW	OVERALL HEIGHT	0.750 INCHES NOMINAL
ABTD	MOUNTING SLOT WIDTH	0.194 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABVG	MOUNTING SLOT LENGTH	0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY
AGTB	DISTANCE FROM RETAINER CENTER TO CENTERLINE OF MOUNTING FACILITY	0.906 INCHES NOMINAL
AGTC	DISTANCE FROM RETAINER CENTER TO END OF EXTENDED CLIP	1.563 INCHES MAXIMUM
AGTD	ANGLE BETWEEN MOUNTING FACILITY AND TENSION LOOP CENTERLINES IN DEG	75.0
AGTE	ANGLE BETWEEN MOUNTING FACILITY AND LOOP HINGE CENTERLINES IN DEG	105.0
AGTM	ACCOMMODATED ITEM SECURING DEVICE TYPE	CLAMP
AGTR	ELECTRON TUBE BASE ACCOMMODATED DIAMETER	1.337 TO 1.377 INCHES
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	1 SLOT SINGLE MOUNTING FACILITY
CBBL	FEATURES PROVIDED	HOLDING SPUR
MATT	MATERIAL	STEEL CORROSION RESISTING
SFTT	SURFACE TREATMENT	PASSIVATE
STYL	STYLE DESIGNATOR	SINGLE FOOT,CLIP LOCKED,TENSION CLAMP

Schedule B & Trade

End Use : 21400	Telecommunications equipment
Schedule B : 8540990000 (NAICS 334419)	Thermionic, cold cathode or photocathode tube parts, nesoi
SITC : 77629	Parts of television picture tubes and other electronic valves and tubes

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	095190 - Hardware, noi sub 9
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components