Buy DM7574J Microcircuit Digita part by National Semiconductor Corporation

Part Number:  DM7574J
NIIN:  010332253
Item Name :  microcircuit digita
CAGE Code:  27014
INC Code:  31779
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for DM7574J (described as Microcircuit Digita), manufactured by National Semiconductor Corporation with CAGE code 27014. This part is registered under NSN 5962-01-033-2253, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5962 Microcircuits Electronic. Our verification process will confirm traceability through supporting identifiers including NIIN 01-033-2253, NCB code 01 (origin: USA), and INC 31779. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DM7574J requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DM7574J

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part DM7574J, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DM7574J with NSN 5962-01-033-2253, 5962010332253

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-01-033-2253

Item PartTypeName:

MICROCIRCUIT,DIGITAL

59620103322530NB
CIICHCCESDPMICCriticalityENAC
UBG
Part NumberISCRNVCRNCCHCCMSDSSADC
10560-37223

Characteristics Data of NSN 5962-01-033-2253, 5962010332253

MRCCriteriaCharacteristic
ADAQBODY LENGTH0.747 INCHES MINIMUM AND 0.815 INCHES MAXIMUM
ADATBODY WIDTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
ADAUBODY HEIGHT0.200 INCHES MAXIMUM
AEHXMAXIMUM POWER DISSIPATION RATING525.0 MILLIWATTS
AFGAOPERATING TEMP RANGE-55.0 TO 125.0 DEG CELSIUS
AFJQSTORAGE TEMP RANGE-65.0 TO 200.0 DEG CELSIUS
AGAVEND ITEM IDENTIFICATIONBUILDING BLOCK 57 FSCM 30003
CBBLFEATURES PROVIDEDHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND PROGRAMMABLE AND PROGRAMMED AND HIGH SPEED AND WIRE-OR OUTPUTS
CQSJINCLOSURE MATERIALCERAMIC AND GLASS
CQSZINCLOSURE CONFIGURATIONDUAL-IN-LINE
CQWXOUTPUT LOGIC FORMTRANSISTOR-TRANSISTOR LOGIC
CQZPINPUT CIRCUIT PATTERN10 INPUT
CZEQTIME RATING PER CHACTERISTIC60.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,LOW TO HIGH LEVEL OUTPUT
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINALS GOLD
TESTTEST DATA DOCUMENT06424-10560 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8542900000 (NAICS 334413) Electronic integrated circuits and microassembly parts
SITC : 77689 Parts of electronic integrated circuits and microassembles

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top