We've received your request for 57A5A182 21 (described as Clamp Loop), manufactured by Navair And Navsea Managed with CAGE code 10001. This part is registered under NSN 5340-00-619-0188, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-619-0188, NCB code 00 (origin: USA), and INC 17532. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 57A5A182 21 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-619-0188 Item PartTypeName: CLAMP,LOOP | 5340 | 006190188 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12-115-00-010 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.170 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.050 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.375 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.593 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.130 INCHES NOMINAL |
| MATT | MATERIAL | PLASTIC POLYAMIDE BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | F-10001,FSCM 18873 MFR REF SINGLE MATERIAL RESPONSE BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | S - 60.0 |
| NMFC: | 061200 - Cable clamps/joints noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
