Buy 4010661-001 Generator Signal part by Neutrik Instrumentation Inc

Part Number: 4010661-001

Alternate P/N: 4010661001

Manufacturer: neutrik instrumentation inc

NSN: 6625-01-387-4843

NIIN: 013874843

Item Name : generator signal

CAGE Code: 38047

FSC: 6625 Electrical and Electronic Properties Measuring and Testing Instruments

INC Code: 03901

Country: USA

NCB Code: 01

FSG: 66 Instruments And Laboratory Equipment

We've received your request for 4010661-001 (described as Generator Signal), manufactured by Neutrik Instrumentation Inc with CAGE code 38047. This part is registered under NSN 6625-01-387-4843, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-387-4843, NCB code 01 (origin: USA), and INC 03901. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4010661-001 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4010661-001

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 4010661-001, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-387-4843, 6625013874843

MRC	Criteria	Characteristic
BDHW	Calibration Accuracy Rating	PLUS OR MINUS .5% (20 HZ TO 20 KHZ) AND PORM 2% (20 TO 100 KHZ)
ABKW	Overall Height	7.500 INCHES NOMINAL
ABHP	Overall Length	20.250 INCHES NOMINAL
FAAZ	Phase	SINGLE
MRC	Decoded Requirement	Clear Text Reply
AMSE	Voltage Rating	108.0 VOLTS MINIMUM AND 126.0 VOLTS MAXIMUM
ABMK	Overall Width	16.500 INCHES NOMINAL
FEAT	Special Features	INCLUDES MATE INTERFACE, 001 HIGHBALANCED OUTPUT, 002 INTERMODULATION DISTORTION, 005 AUDIO FILTER GROUP, AND201 HIGH PERFORMANCE GROUP
BHFW	Fixed Frequency Rating	57.000 HERTZ AND 63.000 HERTZ
AGAV	End Item Identification	210019A, FACTS AN/GSM-358
ALSF	Internal Battery Accommodation	NOT INCLUDED
AYYE	Modulation Type	SQUARE WAVE AND SINGLE SIDE BAND
AFGQ	Frequency Range Rating	+0.020/+100.000 KILOHERTZ
ACDC	Current Type	AC
AMNE	Output Impedance Rating	50.0 OHMS MINIMUM AND 600.0 OHMS MAXIMUM

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8543200000 (NAICS 334515)	Signal generators
SITC : 77878	Electrical machines and apparatus, having individual functions, n.E.S. (other than particle accelerators)

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	R - 65.0
LTL:	R - 65.0
NMFC:	062120 - Generators/motors/parts noi sub4
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	590 - Generators and parts, (machinery and parts),(less than 35 feet)