Buy 804603 Resistor Variable N part by North Atlantic Industries Inc

Part Number:  804603
NIIN:  002286009
Item Name :  resistor variable n
CAGE Code:  0VGU1
INC Code:  37405
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 804603 (described as Resistor Variable N), manufactured by North Atlantic Industries Inc with CAGE code 0VGU1. This part is registered under NSN 5905-00-228-6009, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-228-6009, NCB code 00 (origin: USA), and INC 37405. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 804603 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 804603

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 804603, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 804603 with NSN 5905-00-228-6009, 5905002286009

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-228-6009

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050022860090NA
CIICHCCESDPMICCriticalityENAC
UAU
Part NumberISCRNVCRNCCHCCMSDSSADC
3-12536-1292-20321CA

Characteristics Data of NSN 5905-00-228-6009, 5905002286009

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM
ABJTTERMINAL LENGTH0.185 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
ABKWOVERALL HEIGHT0.520 INCHES MINIMUM AND 0.600 INCHES MAXIMUM
ABMKOVERALL WIDTH0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.086 INCHES NOMINAL
ABWVSHAFT DIAMETER0.100 INCHES NOMINAL
ABXFSHAFT LENGTH0.060 INCHES NOMINAL
ADAQBODY LENGTH0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
ADATBODY WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
ADAUBODY HEIGHT0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AEEZCONTACT ARM ELECTRICAL OFF POSITIONFULLY CCW
AEFDACTUATOR TYPESINGLE SHAFT
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.500 INCHES NOMINAL
AKPVMOUNTING FACILITY QUANTITY2
AXGYMOUNTING METHODUNTHREADED HOLE
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION
CQTMTERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.7 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 PIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top