Buy 138-092-0001 Resistor Variable W part by Northrop Grumman Systems Corporation

Part Number: 138-092-0001

Alternate P/N: 1380920001

Manufacturer: northrop grumman systems corporation

NSN: 5905-00-920-4713

NIIN: 009204713

Item Name : resistor variable w

CAGE Code: 95542

FSC: 5905 Resistors

INC Code: 37408

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 138-092-0001 (described as Resistor Variable W), manufactured by Northrop Grumman Systems Corporation with CAGE code 95542. This part is registered under NSN 5905-00-920-4713, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-920-4713, NCB code 00 (origin: USA), and INC 37408. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 138-092-0001 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 138-092-0001

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 138-092-0001, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 138-092-0001 with NSN 5905-00-920-4713, 5905009204713

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-920-4713 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	009204713	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
138-092-0001	6	2	3

Characteristics Data of NSN 5905-00-920-4713, 5905009204713

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	1.0295 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	1.025 INCHES MINIMUM AND 1.035 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
ABPM	BODY DIAMETER	1.078 INCHES MINIMUM AND 1.109 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.750 INCHES NOMINAL
ADAQ	BODY LENGTH	0.880 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	1.0780 INCHES MINIMUM AND 1.1090 INCHES MAXIMUM
AEDA	MOUNTING LIP DEPTH	0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND
AEDZ	SHAFT BEARING TYPE	BEARING
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	355.0 MINIMUM AND 357.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES
AEFY	SHAFT END PLAY	0.005 INCHES
AEGA	LATERAL RUNOUT	0.001 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.001 INCHES
AEGC	SHAFT RADIAL PLAY	0.002 INCHES
AEGD	MECHANICAL BACKLASH IN DEG ANGULAR ROTATION	2.0
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	CLAMP RING
CBBL	FEATURES PROVIDED	HUMIDITY PROOF
CQCC	ELECTRICAL RESISTANCE PER SECTION	70.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	355.0 MINIMUM AND 357.0 MAXIMUM
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-1.00 TO 1.00 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-400.0 TO 400.0 SINGLE SECTION
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION TERMINAL BASE LINEARITY
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION GRAPH
FEAT	SPECIAL FEATURES	TWO BUILT-IN RESITORS
TEST	TEST DATA DOCUMENT	95542-138-092 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQY	TERMINAL TYPE AND QUANTITY	3 TURRET

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533390080 (NAICS 334416)	Wirewound variable resistors, nesoi
SITC : 77233	Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components