Buy GA810DLIN40 Attenuator Fixed part by Northrop Grumman Systems Corporation

Part Number:  GA810DLIN40
NIIN:  011443316
Item Name :  attenuator fixed
CAGE Code:  26512
INC Code:  14224
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for GA810DLIN40 (described as Attenuator Fixed), manufactured by Northrop Grumman Systems Corporation with CAGE code 26512. This part is registered under NSN 5985-01-144-3316, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-144-3316, NCB code 01 (origin: USA), and INC 14224. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your GA810DLIN40 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GA810DLIN40

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part GA810DLIN40, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number GA810DLIN40 with NSN 5985-01-144-3316, 5985011443316

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-01-144-3316

Item PartTypeName:

ATTENUATOR,FIXED

59850114433160P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
40-40595

Characteristics Data of NSN 5985-01-144-3316, 5985011443316

MRCCriteriaCharacteristic
AHUCCOAXIAL CONNECTOR SERIES DESIGNATIONN
AJDBPOWER RATING150.0 WATTS AVERAGE AND 10.0 KILOWATTS PEAK
AJDKRF SIGNAL ATTENUATION IN DECIBELS40.0
ASYEATTENUATION ACCURACY REFERENCE FREQUENCY1.5 GIGAHERTZ
ASYNATTENUATION ACCURACY IN DECIBELS-0.50 TO 0.50
ASZLFREQUENCY SENSITIVITY ATTENUATION IN DECIBELS40.00
ASZNCONNECTION TYPE PER FUNCTIONFEMALE OUTPUT AND MALE INPUT
AWJNUNPACKAGED UNIT WEIGHT2.500 POUNDS
AXGYMOUNTING METHODCONNECTOR
BBHSTERMINAL TYPE AND QUANTITY2 CONNECTOR
BNGRFREQUENCY RANGE0.000 HERTZ MINIMUM AND 1.500 GIGAHERTZ MAXIMUM
MATTMATERIALALUMINUM BODY
SFTTSURFACE TREATMENTPAINT BODY
ZZZVFSC APPLICATION DATAANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
AAFSAPPLICATION DESIGNTRANSMISSION LINE
AAQLBODY STYLERECTANGULAR,TERMINAL/TERMINALS ON OPPOSITE SURFACES
ABHPOVERALL LENGTH7.170 INCHES MAXIMUM
ABKWOVERALL HEIGHT3.060 INCHES NOMINAL
ABMKOVERALL WIDTH3.060 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-55.0 TO 125.0 DEG CELSIUS
AHTWVOLTAGE STANDING WAVE RATIO1.10
AHTYINPUT IMPEDANCE RATING IN OHMS50.0
AHTZOUTPUT IMPEDANCE RATING IN OHMS50.0

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 060535 - Aerial/antennas directional
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 723 - Radio parts and equipment, excluding tubes packed separately

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top