Buy 194D Mortiser Hollow Chisel Horizontal part by Oliver Machinery Co

Part Number: 194D

Manufacturer: oliver machinery co

NSN: 3220-01-372-8676

NIIN: 013728676

Item Name : mortiser hollow chisel horizontal

CAGE Code: 44769

FSC: 3220 Woodworking Machines

INC Code: 07444

Country: USA

NCB Code: 01

FSG: 32 Woodworking Machinery and Equipment

We've received your request for 194D (described as Mortiser Hollow Chisel Horizontal), manufactured by Oliver Machinery Co with CAGE code 44769. This part is registered under NSN 3220-01-372-8676, classified in FSG 32 Woodworking Machinery and Equipment / FSC 3220 Woodworking Machines. Our verification process will confirm traceability through supporting identifiers including NIIN 01-372-8676, NCB code 01 (origin: USA), and INC 07444. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 194D requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 194D

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 194D, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 194D with NSN 3220-01-372-8676, 3220013728676

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3220-01-372-8676 Item Description: Mortiser Hollow Chisel Horizontal	3220	013728676	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
194d	5	2	3

Characteristics Data of NSN 3220-01-372-8676, 3220013728676

MRC	Criteria	Characteristic
AMWX	FEED METHOD	HAND
ELEC	VOLTAGE IN VOLTS	115.0
FAAZ	PHASE	SINGLE
AKYN	FURNISHED ITEMS AND QUANTITY	MAGNETIC CONTROL 1; TABLE CLAMP 1
ASQQ	HORSEPOWER RATING	1.00
BCRH	SPINDLE QUANTITY	1
BCRQ	MAXIMUM DISTANCE FROM FENCE TO CHISEL CENTER	4.000 INCHES
FEAT	SPECIAL FEATURES	TABLE CAN BE LOWERED BY MEANS OF A HANDWHEEL AND SCREW,TO PERMIT MORTISING IN THE EDGE OF STOCK 7 UP TO 20 IN. WIDE WHEN USING THE TABLE. THE TABLE KNEE,WITH THE TABLE ATTACHED,CAN BE REMOVED FROM THE MACHINE IN FIVE MINUTES. WITH THE TABLE REMOVED THE MACHINE WILL MORTISE IN THE END OF STOCK UP TO 32 IN. WIDE. TABLE TRAVEL IS 9 IN. HORIZONTALLY. THE MOTOR HEAD SLIDES ON V-WAYS SCRAPED TO CLOSE TOLERANCES,AFTER ACCURATE PLANING. THE WAYS HAVE GIBS WITH SET SCREWS TO TAKE UP POSSIBLE FUTURE WEAR. THREE SLIDES ARE LOCATED ON THE VERTICAL WAYS. THE MOTOR IS CARRIES ON ONE SLIDE; THE M9OTOR IS EQUIPPED WITH TRUST BALL BEARING TO HANDLE THRUST OF THE BIT; MOTOR IS 3600 RPM
FREQ	FREQUENCY IN HERTZ	60.0
ATJK	POWER SOURCE	ELECTRIC MOTOR
ACDC	CURRENT TYPE	AC
ARDQ	TABLE LENGTH	28.000 INCHES NOMINAL
BCRL	MAXIMUM CHISEL SIZE ACCOMMODATED	0.375 INCHES
BCRP	MAXIMUM DISTANCE FROM TABLE TO HORIZONTAL CHISEL CENTERLINE	20.000 INCHES