Buy 213040-16-0110 Hose Assembly Nonme part by Parker Hannifin Corporation

Part Number:  213040-16-0110
Alternate P/N:  213040160110
Manufacturer:  parker hannifin corporation
NIIN:  009866987
Item Name :  hose assembly nonme
CAGE Code:  98441
INC Code:  20311
Country:  USA
NCB Code:  00
FSG:  47 Pipe Tubing Hose and Fittings

We've received your request for 213040-16-0110 (described as Hose Assembly Nonme), manufactured by Parker Hannifin Corporation with CAGE code 98441. This part is registered under NSN 4720-00-986-6987, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 00-986-6987, NCB code 00 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 213040-16-0110 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 213040-16-0110

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 213040-16-0110, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 213040-16-0110 with NSN 4720-00-986-6987, 4720009866987

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-00-986-6987

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

4720009866987WN
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
213040-16-0110223

Characteristics Data of NSN 4720-00-986-6987, 4720009866987

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AAJDTHREAD CLASS2B 1ST END
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END
AARXINSIDE DIAMETER0.875 INCHES NOMINAL
ABJHTEMP RATING-65.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER1.203 INCHES NOMINAL
ACKHMINIMUM INSIDE BENDING RADIUS7.375 INCHES
AHNCCONNECTION STYLEPLAIN 2ND END
AHNCCONNECTION STYLESWIVEL NUT WITH COMPRESSION SLEEVE 1ST END
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END
AKUUEND CONNECTION DESIGNELBOW 2ND END
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END
CMLPTHREAD QUANTITY PER INCH12 1ST END
CQBDBURST TEST PRESSURE1500.0 POUNDS PER SQUARE INCH
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC
CQGMMAXIMUM OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH
CQJXNOMINAL THREAD SIZE1.312 INCHES 1ST END
CQRBSEAT ANGLE37.0 DEGREES 1ST END
CQRBSEAT ANGLE45.0 DEGREES 2ND END
CRDWHYDROSTATIC TEST PRESSURE750.0 POUNDS PER SQUARE INCH
CRFYFLOW ANGLE45.0 DEGREES 2ND END
CRWLINSIDE SURFACE CONDITIONSMOOTH
CRXXMEASURING METHOD AND LENGTH11.203 INCHES NOMINAL OVERALL
CTCJFLANGE STYLEDOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END
MEDAMEDIA FOR WHICH DESIGNEDFUEL/OIL,HYDROCARBON SINGLE RESPONSE
THSDTHREAD SERIES DESIGNATORUN 1ST END

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL J2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 125850 - Muffler/exhaust sys/pipe/etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 736 - Plumbing supplies

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top