Buy HB3-015768 Transformer Power part by Pelton And Crane Co

Part Number:  HB3-015768
Alternate P/N:  HB3015768
Manufacturer:  pelton and crane co
NIIN:  011542158
Item Name :  transformer power
CAGE Code:  46308
INC Code:  32496
Country:  USA
NCB Code:  01

We've received your request for HB3-015768 (described as Transformer Power), manufactured by Pelton And Crane Co with CAGE code 46308. This part is registered under NSN 5950-01-154-2158, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-154-2158, NCB code 01 (origin: USA), and INC 32496. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your HB3-015768 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HB3-015768

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part HB3-015768, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number HB3-015768 with NSN 5950-01-154-2158, 5950011542158

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-01-154-2158

Item Description:

Transformer Power

59500115421580P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
Hb3-015768 95

Characteristics Data of NSN 5950-01-154-2158, 5950011542158

MRCCriteriaCharacteristic
AKNAINCLOSURE TYPEOPEN
CRMJWINDING POWER RATING216.0 VOLTS-AMPERES SINGLE COMPONENT SINGLE PRIMARY
FEATSPECIAL FEATURESTWO BLACK OUTPUT LEADS FROM SECONDARY; TERMINATED W/FEMALE PINS,HOUSED IN A PLASTIC MALE PLUG
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH2.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABMKOVERALL WIDTH3.000 INCHES NOMINAL
ACZFMAXIMUM TRANSFORMER POWER RATING216.0 VOLT-AMPERE SINGLE COMPONENT
ACZBFREQUENCY RATING60.0 HERTZ NOMINAL SINGLE COMPONENT
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.125 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABKWOVERALL HEIGHT3.125 INCHES NOMINAL
ABTDMOUNTING SLOT WIDTH0.187 INCHES NOMINAL SINGLE GROUP
ACZCINPUT-OUTPUT PHASE RELATIONSHIPSINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
AFHNINSTALLATION FOR WHICH DESIGNEDINDOOR NONPORTABLE
AGAVEND ITEM IDENTIFICATION6520-00-000-0158 LIGHT SET,DENTAL OPERATING
BPLCWINDING FUNCTION AND QUANTITY1 PRIMARY SINGLE COMPONENT AND 1 SECONDARY SINGLE COMPONENT
CRBZWINDING OPERATING CURRENT1.8 AMPERES AC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY
CWJSWINDING OPERATING VOLTAGE105.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY AND 115.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY AND 125.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY AND 135.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY
ABHPOVERALL LENGTH3.750 INCHES NOMINAL
CBME(NON-CORE DATA) CUBIC MEASURE0.02 CUBIC INCHES
AKPVMOUNTING FACILITY QUANTITY4 SINGLE GROUP
SR-5DESIGN CONTROL REFERENCE3321846
CQLC(NON-CORE DATA) WINDING TAP LOCATIONMULTIPLE TAPS W/O CENTER TAP
PKWT(NON-CORE DATA) UNPACKAGED UNIT WEIGHT5.250 POUNDS
TTQYTERMINAL TYPE AND QUANTITY1 WIRE LEAD AND 4 QUICK DISCONNECT, FEMALE AND 1 CONNECTOR, PLUG
ZZZP(NON-CORE DATA) PURCHASE DESCRIPTION IDENTIFICATION46308-HB3-015768
SR-5MANUFACTURERS CODE46308
RDAL(NON-CORE DATA) REFERENCE DATA AND LITERATURELIGHT FANTASTIC LF II PARTS LIST
AXGYMOUNTING METHODSLOT SINGLE GROUP
SR-5THE MANUFACTURERS DATA
BFMFCOOLING METHODSELF-COOLED

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504314065 (NAICS 334416) Transformers, having a power handling capaci type 40 va or greater but less than 1 kva, nesoi
SITC : 77119 Electric transformers, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC L
Classification Control U
MGMT_CTL C2203x-
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top