Buy 166-VB-6125 Cap Protective Dust part by Plastiglide Mfg Corp

Part Number: 166-VB-6125

Alternate P/N: 166VB6125

Manufacturer: plastiglide mfg corp

NSN: 5340-01-226-5453

NIIN: 012265453

Item Name : cap protective dust

CAGE Code: 11897

FSC: 5340 Hardware Commercial

INC Code: 13432

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 166-VB-6125 (described as Cap Protective Dust), manufactured by Plastiglide Mfg Corp with CAGE code 11897. This part is registered under NSN 5340-01-226-5453, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-226-5453, NCB code 01 (origin: USA), and INC 13432. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 166-VB-6125 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 166-VB-6125

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 166-VB-6125, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 166-VB-6125 with NSN 5340-01-226-5453, 5340012265453

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-226-5453 Item PartTypeName: CAP,PROTECTIVE,DUST AND MOISTURE	5340	012265453		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
166-VB-6125	5	9	3

Characteristics Data of NSN 5340-01-226-5453, 5340012265453

MRC	Criteria	Characteristic
APGF	DESIGN TYPE	FRICTION
ATYD	OPENING INSIDE DIAMETER FOR WHICH DESIGNED	0.125 INCHES NOMINAL
BZMX	ROUND CAP OUTSIDE SURFACE CONDITION	SMOOTH
FEAT	SPECIAL FEATURES	HEIGHT 0.433 WIRE GAUGE 11 CAP FITS WIRE WITH OUTSIDE DIAMETER OF 0.125IN
MATT	MATERIAL	PLASTIC VINYL

Schedule B & Trade

End Use : 12770	Other industrial supplies
Schedule B : 3926904500 (NAICS 339991)	Gaskets, washers & other seals
SITC : 89399	Articles of plastics, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown