Buy 37-680 Jointer Woodworking part by Porter Cable Delta

Part Number: 37-680

Alternate P/N: 37680

Manufacturer: porter cable delta

NSN: 3220-00-242-4482

NIIN: 002424482

Item Name : jointer woodworking

CAGE Code: 60933

INC Code: 07238

Country: USA

NCB Code: 00

We've received your request for 37-680 (described as Jointer Woodworking), manufactured by Porter Cable Delta with CAGE code 60933. This part is registered under NSN 3220-00-242-4482, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-242-4482, NCB code 00 (origin: USA), and INC 07238. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 37-680 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 37-680

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 37-680, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 37-680 with NSN 3220-00-242-4482, 3220002424482

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3220-00-242-4482 Item PartTypeName: JOINTER,WOODWORKING	3220	002424482	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1610010 AND 6471413	5	8	E

Characteristics Data of NSN 3220-00-242-4482, 3220002424482

MRC	Criteria	Characteristic
AAXX	MOUNTING TYPE	BENCH OR FLOOR
ACDC	CURRENT TYPE	AC
AJSS	FREQUENCY IN HERTZ	60.0 NOMINAL
AMWX	FEED METHOD	HAND
APHA	OPERATING VOLTAGE IN VOLTS	220.0 MINIMUM AND 440.0 MAXIMUM
ASQQ	HORSEPOWER RATING	1.00
ATJK	POWER SOURCE	ELECTRIC MOTOR
BBGB	PLANING WIDTH	8.000 INCHES NOMINAL
BBGC	RABBETING DEPTH	0.500 INCHES NOMINAL
BBGG	CUTTER HEAD CYLINDER DIAMETER	3.000 INCHES NOMINAL
BBGJ	CUTTER HEAD KNIFE QUANTITY	3
BBGK	TABLE OVERALL LENGTH	60.000 INCHES NOMINAL
BBGM	FENCE OVERALL LENGTH	34.000 INCHES NOMINAL
BBGN	FENCE TILT ANGLE IN DEG	90.0
BBJK	CUTTER HEAD KNIFE OVERALL LENGTH	8.000 INCHES NOMINAL
BBJM	FENCE OVERALL HEIGHT	4.000 INCHES NOMINAL
FAAZ	PHASE	THREE
ZZZT	NONDEFINITIVE SPEC/STD DATA	B CLASS AND 8 SIZE AND 1 TYPE

Schedule B & Trade

End Use : 21140	Wood, glass, plastic
Schedule B : 8465100015 (NAICS 930000)	Woodworking machines which carry out different types of machining operations w/o tool change betweensuch operations (except tenoners), used or rebuilt
SITC : 72812	Machine tools for working wood, cork, bone, hard rubber, hard plastic, etc.(including machines for nailing, stapling, glueing, etc.), n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	L
Classification Control	U
MGMT_CTL	-------
Quantity per pack	1
Repariability	If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	133300 - Machinery/machines noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72E - Engineer and material handling equipment, test/tool sets and equipment