Buy GM902607 Ammeter part by Power Mate Co

Part Number:  GM902607
Manufacturer:  power mate co
NIIN:  011154090
Item Name :  ammeter
CAGE Code:  23934
INC Code:  16450
Country:  USA
NCB Code:  01

We've received your request for GM902607 (described as Ammeter), manufactured by Power Mate Co with CAGE code 23934. This part is registered under NSN 6625-01-115-4090, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-115-4090, NCB code 01 (origin: USA), and INC 16450. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your GM902607 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GM902607

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part GM902607, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-115-4090, 6625011154090

MRCCriteriaCharacteristic
ABKWOVERALL HEIGHT2.375 INCHES NOMINAL
SFTTSURFACE TREATMENTPAINT
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
AMKDINDICATOR TYPEDIAL W/POINTER
AWZJPOWER SOURCEEXTERNAL
BLKZMOUNTING STUD DIAMETER0.109 INCHES NOMINAL
BHDCSCALE GRADUATION TYPELINEAR SINGLE INDICATOR SINGLE RANGE
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.871 INCHES NOMINAL
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 THREADED STUD
APMMDIAL SCALE MARKING COLORBLACK SINGLE INDICATOR SINGLE RANGE
AQFYBACKGROUND COLORWHITE SINGLE INDICATOR SINGLE RANGE
ADZCENVIRONMENTAL PROTECTIONAIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT
CTQLMOVEMENT SUSPENSION METHODJEWEL PIVOT BASE
AMQYINSTALLATION DESIGNPANEL
APPNACCURACY IN PERCENT-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
ABMKOVERALL WIDTH2.809 INCHES NOMINAL
BLSBSCALE SELECTION METHODTERMINAL
ASSSPOINTER COLORBLACK SINGLE INDICATOR SINGLE RANGE
BHMWMEASUREMENT RANGE0.0 TO 6.0 AMPERES, DC SINGLE INDICATOR SINGLE RANGE
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED STUD
ABHPOVERALL LENGTH2.030 INCHES NOMINAL
ADAGMOUNTING STUD LENGTH0.465 INCHES NOMINAL
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1.871 INCHES NOMINAL
CBBLFEATURES PROVIDEDMAGNETIC SHIELD AND ZERO ADJUSTER
AKYNFURNISHED ITEMS AND QUANTITYNUT 6; LOCKWASHER 6; FLAT WASHER 2; SEAL 1
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDMAGNETIC
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
ANRLMOUNTING ARRANGEMENT STYLEFOUR HOLE/STUD RECTANGULAR/SQUARE
FEATSPECIAL FEATURESRUGGEDIZED
APSTMETER DEPTH BEHIND MOUNTING FLANGE1.115 INCHES NOMINAL
MATTMATERIALPLASTIC
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS3000.0
BHSX(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPENONELECTRONIC
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
ANTGSENSITIVITY RATING6.0 AMPERES
APSWMETER BODY DIAMETER BEHIND MOUNTING FLANGE2.151 INCHES NOMINAL
STYLSTYLE DESIGNATORRECTANGULAR FLUSH MTG
ABWGSCALE DIVISION QUANTITY60 SINGLE INDICATOR SINGLE RANGE
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 136740 - Meters elec/parts
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top