Buy TU5012S20 Resistor Variable N part by Precision Electronics Inc

Part Number:  TU5012S20
Manufacturer:  precision electronics inc
NIIN:  006884378
Item Name :  resistor variable n
CAGE Code:  35627
INC Code:  37405
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for TU5012S20 (described as Resistor Variable N), manufactured by Precision Electronics Inc with CAGE code 35627. This part is registered under NSN 5905-00-688-4378, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-688-4378, NCB code 00 (origin: USA), and INC 37405. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your TU5012S20 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TU5012S20

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part TU5012S20, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number TU5012S20 with NSN 5905-00-688-4378, 5905006884378

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-688-4378

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050068843780NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
8P1035TYPE650295

Characteristics Data of NSN 5905-00-688-4378, 5905006884378

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
ABPMBODY DIAMETER0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
ABXFSHAFT LENGTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.922 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFPNONTURN DEVICE RADIUS0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
AFJNFRAGILITY FACTORMODERATELY RUGGED
CQCCELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
CQPHDEVICE DESIGN TYPENONTURN AT 9 OCLOCK
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.000 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
ADAQBODY LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
AXGYMOUNTING METHODSTANDARD BUSHING
CQTMTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top