Buy 5787 Transformer Power part by Precision Electronics Inc

Part Number:  5787
Manufacturer:  precision electronics inc
NIIN:  008385144
Item Name :  transformer power
CAGE Code:  13483
INC Code:  32496
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 5787 (described as Transformer Power), manufactured by Precision Electronics Inc with CAGE code 13483. This part is registered under NSN 5950-00-838-5144, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-838-5144, NCB code 00 (origin: USA), and INC 32496. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5787 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5787

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 5787, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 5787 with NSN 5950-00-838-5144, 5950008385144

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-00-838-5144

Item PartTypeName:

TRANSFORMER,POWER

59500083851440P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
10043643623

Characteristics Data of NSN 5950-00-838-5144, 5950008385144

MRCCriteriaCharacteristic
TTQYTERMINAL TYPE AND QUANTITY7 SOLDER STUD
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.375 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ACZBFREQUENCY RATING380.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT
ACZCINPUT-OUTPUT PHASE RELATIONSHIPSINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
AKNAINCLOSURE TYPEPARTIALLY INCLOSED,DOUBLE SHELL
AKPVMOUNTING FACILITY QUANTITY4 SINGLE GROUP
CWJSWINDING OPERATING VOLTAGE6.30 AC VOLTS NOMINAL SINGLE COMPONENT ALL SECONDARY
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1.750 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABTBMOUNTING HOLE DIAMETER0.188 INCHES NOMINAL SINGLE GROUP
ACZXWINDING SHIELDING METHODINTERNAL SHIELD GROUNDED TO CORE AND BROUGHT OUT TO TERMINAL SINGLE COMPONENT
ADAQBODY LENGTH3.187 INCHES NOMINAL
ADATBODY WIDTH2.312 INCHES NOMINAL
ADAUBODY HEIGHT3.062 INCHES MAXIMUM
AEHZMAXIMUM OPERATING TEMP75.0 DEG CELSIUS
AXGYMOUNTING METHODFLANGE AND UNTHREADED HOLE SINGLE GROUP
BPLCWINDING FUNCTION AND QUANTITY1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT
CRBZWINDING OPERATING CURRENT11.0 AMPERES AC MAXIMUM SINGLE COMPONENT 2ND SECONDARY
CRBZWINDING OPERATING CURRENT7.0 AMPERES AC MAXIMUM SINGLE COMPONENT 1ST SECONDARY
CWJSWINDING OPERATING VOLTAGE115.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top