Buy MS28741-8-0300 Hose Assembly Nonme part by Precision Form Rivet Inc

Part Number: MS28741-8-0300

Alternate P/N: MS2874180300

Manufacturer: precision form rivet inc

NSN: 4720-00-461-9797

NIIN: 004619797

Item Name : hose assembly nonme

CAGE Code: 14728

FSC: 4720 Hose and Tubing Flexible

INC Code: 20311

Country: USA

NCB Code: 00

FSG: 47 Pipe Tubing Hose and Fittings

We've received your request for MS28741-8-0300 (described as Hose Assembly Nonme), manufactured by Precision Form Rivet Inc with CAGE code 14728. This part is registered under NSN 4720-00-461-9797, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 00-461-9797, NCB code 00 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS28741-8-0300 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS28741-8-0300

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS28741-8-0300, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS28741-8-0300 with NSN 4720-00-461-9797, 4720004619797

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-00-461-9797 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	004619797	W	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
360-8D0300	3	1	5

Characteristics Data of NSN 4720-00-461-9797, 4720004619797

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND
AAJD	THREAD CLASS	3B 1ST END
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END
AARX	INSIDE DIAMETER	0.406 INCHES NOMINAL
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKV	OUTSIDE DIAMETER	0.766 INCHES NOMINAL
ACKH	MINIMUM INSIDE BENDING RADIUS	4.625 INCHES
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END
CQBD	BURST TEST PRESSURE	8000.0 POUNDS PER SQUARE INCH
CQCS	LAYER COMPOSITION AND LOCATION	2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
CQGM	MAXIMUM OPERATING PRESSURE	2000.0 POUNDS PER SQUARE INCH
CQJX	NOMINAL THREAD SIZE	0.750 INCHES 1ST END
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END
CRDW	HYDROSTATIC TEST PRESSURE	4000.0 POUNDS PER SQUARE INCH
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	MILDEW RESISTANT AND OIL RESISTANT
CRSM	VACUUM IN TORR	50.8
CRWL	INSIDE SURFACE CONDITION	SMOOTH
CRXX	MEASURING METHOD AND LENGTH	30.000 INCHES NOMINAL WORKING
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL,HYDROCARBON SINGLE RESPONSE
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END
ZZZK	SPECIFICATION/STANDARD DATA	96906-MS28741 GOVERNMENT STANDARD

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	J2200x-
Quantity per pack	1
Repariability	Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life	120 mo.
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	051140 - Hose: noi tubing
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	736 - Plumbing supplies