Buy 470208 Stud Shouldered part by Precision Threaded Products Inc

Part Number: 470208

Manufacturer: precision threaded products inc

NSN: 5307-00-221-1947

NIIN: 002211947

Item Name : stud shouldered

CAGE Code: 02991

FSC: 5307 Studs

INC Code: 15946

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 470208 (described as Stud Shouldered), manufactured by Precision Threaded Products Inc with CAGE code 02991. This part is registered under NSN 5307-00-221-1947, classified in FSG 53 Hardware and Abrasives / FSC 5307 Studs. Our verification process will confirm traceability through supporting identifiers including NIIN 00-221-1947, NCB code 00 (origin: USA), and INC 15946. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 470208 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 470208

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 470208, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 470208 with NSN 5307-00-221-1947, 5307002211947

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5307-00-221-1947 Item PartTypeName: STUD,SHOULDERED	5307	002211947	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
470208	6	2	5

Characteristics Data of NSN 5307-00-221-1947, 5307002211947

MRC	Criteria	Characteristic
AAJE	THREAD PITCH DIAMETERS	0.3420 TO 0.3449 INCHES NUT THREAD
AAJE	THREAD PITCH DIAMETERS	0.3420 TO 0.3449 INCHES STUD THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND NUT THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND STUD THREAD
AASA	THREAD LENGTH	0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM STUD THREAD
AASA	THREAD LENGTH	1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM NUT THREAD
AAVH	SHOULDER DIAMETER	0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM
AAVK	SHOULDER LENGTH	0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
ABHP	OVERALL LENGTH	6.290 INCHES MINIMUM AND 6.330 INCHES MAXIMUM
ADDB	NUT END SHANK LENGTH	0.550 INCHES MINIMUM AND 0.610 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24 NUT THREAD
CMLP	THREAD QUANTITY PER INCH	24 STUD THREAD
CQJX	NOMINAL THREAD SIZE	0.375 INCHES NUT THREAD
CQJX	NOMINAL THREAD SIZE	0.375 INCHES STUD THREAD
CSJZ	STUD END SHANK LENGTH	3.270 INCHES MINIMUM AND 3.330 INCHES MAXIMUM
CSXH	STUD END SHANK DIAMETER	0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
CTDT	NUT END SHANK DIAMETER	0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
MATT	MATERIAL	STEEL CORROSION RESISTING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 7482 ASSN STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	SHOULDERED
THSD	THREAD SERIES DESIGNATOR	UNS NUT THREAD
THSD	THREAD SERIES DESIGNATOR	UNS STUD THREAD

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	Z - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)