Buy 555106 Meter Special Scale part by Prime Technologies Ltd

Part Number:  555106
Manufacturer:  prime technologies ltd
NIIN:  005146216
Item Name :  meter special scale
CAGE Code:  81030
INC Code:  61955
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 555106 (described as Meter Special Scale), manufactured by Prime Technologies Ltd with CAGE code 81030. This part is registered under NSN 6625-00-514-6216, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-514-6216, NCB code 00 (origin: USA), and INC 61955. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 555106 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 555106

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 555106, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-514-6216, 6625005146216

MRCCriteriaCharacteristic
CBBLFEATURES PROVIDEDELECTRICAL OVERLOAD PROTECTION AND ZERO ADJUSTER
ANTGSENSITIVITY RATING1000.0 OHMS PER VOLT AND 10.0 VOLTS
STYLSTYLE DESIGNATORRECTANGULAR SURFACE MTG
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED
AMQYINSTALLATION DESIGNPANEL
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 TURRET
AQFYBACKGROUND COLORWHITE SINGLE INDICATOR SINGLE RANGE
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 BRACKET AND 1 FLANGE AND 4 SCREW
APPNACCURACY IN PERCENT-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
ABMKOVERALL WIDTH1.600 INCHES MAXIMUM
AMKDINDICATOR TYPEDIAL W/POINTER
ADZCENVIRONMENTAL PROTECTIONCOLD RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
ABHPOVERALL LENGTH2.646 INCHES MAXIMUM
CTQLMOVEMENT SUSPENSION METHODJEWEL PIVOT BASE
MARKSPECIAL MARKINGSONE BLACK LINE ON EA SIDE OF SCALE; ONE THK RED LINE CTR SCALE
ABWGSCALE DIVISION QUANTITY2 SINGLE INDICATOR SINGLE RANGE
BHDCSCALE GRADUATION TYPELINEAR SINGLE INDICATOR SINGLE RANGE
ABKWOVERALL HEIGHT0.515 INCHES MAXIMUM
FEATSPECIAL FEATURESRUGGEDIZED
ASTWSCALE MARKINGSET LEVEL
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS500.0
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDNONMAGNETIC
ASSSPOINTER COLORBLACK SINGLE INDICATOR SINGLE RANGE
MATTMATERIALPLASTIC
APMMDIAL SCALE MARKING COLORBLACK AND RED SINGLE INDICATOR SINGLE RANGE

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 136740 - Meters elec/parts
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top