Buy 166-38-SS-1032-E Standoff Threaded Spacing part by Promptus Electonic Hardware Inc

Part Number: 166-38-SS-1032-E

Alternate P/N: 16638SS1032E

Manufacturer: promptus electonic hardware inc

NSN: 5307-01-093-0802

NIIN: 010930802

Item Name : standoff threaded spacing

CAGE Code: 57177

FSC: 5307 Studs

INC Code: 40280

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 166-38-SS-1032-E (described as Standoff Threaded Spacing), manufactured by Promptus Electonic Hardware Inc with CAGE code 57177. This part is registered under NSN 5307-01-093-0802, classified in FSG 53 Hardware and Abrasives / FSC 5307 Studs. Our verification process will confirm traceability through supporting identifiers including NIIN 01-093-0802, NCB code 01 (origin: USA), and INC 40280. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 166-38-SS-1032-E requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 166-38-SS-1032-E

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 166-38-SS-1032-E, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5307-01-093-0802, 5307010930802

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-763 FED SPEC 1ST MATERIAL RESPONSE STANDOFF OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE STANDOFF OR ASTM A484 ASSN STD 2ND MATERIAL RESPONSE STANDOFF OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE STANDOFF
AASA	THREAD LENGTH	0.500 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD)0.375 INCHES NOMINAL RIGHT EXTERNAL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STANDOFF
AFGG	FLANGE WIDTH ACROSS FLATS	0.375 INCHES NOMINAL
AAJD	THREAD CLASS	2B LEFT INTERNAL (INCLUDES THRU THREAD)2A RIGHT EXTERNAL
ABKU	FLANGE THICKNESS	3.234 INCHES MINIMUM AND 3.266 INCHES MAXIMUM
ABRY	LENGTH	3.594 INCHES MINIMUM AND 3.656 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	32 RIGHT EXTERNAL
CQJX	NOMINAL THREAD SIZE	0.190 INCHES LEFT INTERNAL (INCLUDES THRU THREAD)
MATT	MATERIAL	STEEL COMP 303SE STANDOFF OR STEEL COMP 303 STANDOFF OR STEEL COMP 303SE STANDOFF
SFTT	SURFACE TREATMENT	PASSIVATE STANDOFF
STYL	STYLE DESIGNATOR	FLANGED WITH LEFT INTERNAL THREAD
THSD	THREAD SERIES DESIGNATOR	UNF LEFT INTERNAL (INCLUDES THRU THREAD)

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown