Buy QTC10Y-511G Resistor Thermal part by Quality Thermistor Inc

Part Number: QTC10Y-511G

Alternate P/N: QTC10Y511G

Manufacturer: quality thermistor inc

NSN: 5905-01-259-5538

NIIN: 012595538

Item Name : resistor thermal

CAGE Code: 56866

INC Code: 00309

Country: USA

NCB Code: 01

We've received your request for QTC10Y-511G (described as Resistor Thermal), manufactured by Quality Thermistor Inc with CAGE code 56866. This part is registered under NSN 5905-01-259-5538, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-259-5538, NCB code 01 (origin: USA), and INC 00309. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your QTC10Y-511G requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for QTC10Y-511G

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part QTC10Y-511G, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number QTC10Y-511G with NSN 5905-01-259-5538, 5905012595538

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-259-5538 Item PartTypeName: RESISTOR,THERMAL	5905	012595538	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
6135475-2	5	2	3

Characteristics Data of NSN 5905-01-259-5538, 5905012595538

MRC	Criteria	Characteristic
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	125.0 DEG CELSIUS 10TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	30.0 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	60.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	80.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	1.45248 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	148.614 OHMS 6TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	2.30877 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	20.4306 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	25.704 OHMS 10TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	32.436 OHMS 9TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	421.311 OHMS 5TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	47.073 OHMS 8TH RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	6.4158 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT
AEJE	ZERO POWER RESISTANCE AT SPECIFIED TEMP	81.192 OHMS 7TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-10.2 TO 10.2 1ST RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-2.6 TO 2.6 5TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-4.3 TO 4.3 4TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-5.0 TO 5.0 6TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-5.3 TO 5.3 3RD RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-6.3 TO 6.3 7TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-7.5 TO 7.5 8TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-7.6 TO 7.6 2ND RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-8.1 TO 8.1 9TH RESISTANCE-TEMPERATURE POINT
AEJF	RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT	-8.9 TO 8.9 10TH RESISTANCE-TEMPERATURE POINT
AKNA	INCLOSURE TYPE	ENCAPSULATED
CQWD	ZERO POWER RESISTANCE	510.000 OHMS
CRQJ	ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP	-2.0 TO 2.0
CTGT	REFERENCE TEMP IN DEG CELSIUS	25.0
SFTT	SURFACE TREATMENT	SOLDER TERMINAL
STYL	STYLE DESIGNATOR	BEAD
TEST	TEST DATA DOCUMENT	03640-6135475 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQY	TERMINAL TYPE AND QUANTITY	2 WIRE LEAD
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	1.000 INCHES MINIMUM
ADAR	BODY OUTSIDE DIAMETER	0.215 INCHES MAXIMUM
AEBT	TERMINAL DIAMETER	0.015 INCHES NOMINAL
AEHY	AMBIENT TEMP AT FULL RATED POWER	25.0 DEG CELSIUS
AEHZ	MAXIMUM OPERATING TEMP	125.0 DEG CELSIUS
AEJC	ZERO POWER TEMP COEFFICIENT OF RESISTANCE IN PERCENT PER DEG CELSIUS	-3.90
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	-10.0 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	-30.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	-50.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	0.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	100.0 DEG CELSIUS 8TH RESISTANCE-TEMPERATURE POINT
AEJD	TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER	115.0 DEG CELSIUS 9TH RESISTANCE-TEMPERATURE POINT

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533400080 (NAICS 334416)	Variable resistors, including potentiometers, nesoi
SITC : 77235	Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components