AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
+1-714-705-4780 sales@aerospaceexchange.com
QUICK QUOTE HERE
Home   /   Quest Technologies Inc    /   Part Q 100

Buy Q-100 Meter Noise Level part by Quest Technologies Inc

Part Number:  Q-100
Alternate P/N:  Q100
Manufacturer:  quest technologies inc
NSN:  6625-01-478-3188
NIIN:  014783188
Item Name :  meter noise level
CAGE Code:  016P3
INC Code:  48206
Country:  USA
NCB Code:  01

We've received your request for Q-100 (described as Meter Noise Level), manufactured by Quest Technologies Inc with CAGE code 016P3. This part is registered under NSN 6625-01-478-3188, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-478-3188, NCB code 01 (origin: USA), and INC 48206. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your Q-100 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for Q-100

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload  

How to Begin the Quotation Process

  1. Fill out and submit the form for part Q-100, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-478-3188, 6625014783188

MRCCriteriaCharacteristic
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
AMQYINSTALLATION DESIGNHAND HELD
ABFYOVERALL DEPTH1.000 INCHES NOMINAL
FEATSPECIAL FEATURESWT, 11.5 OZ; TEMP OPERATING, M10CTO P 50 C; BATTERY, SINGLE 9-VOLT ALKALINE; BACK UP BATTERY, LITHIUM CELL
BHMWMEASUREMENT RANGE40.0 TO 110.0 DECIBELS SINGLE INDICATOR SINGLE RANGE
ABHPOVERALL LENGTH4.500 INCHES NOMINAL
BFQNDISPLAY TYPELIQUID CRYSTAL
ABMKOVERALL WIDTH2.800 INCHES NOMINAL
STYLSTYLE DESIGNATORHAND-HELD
AMKDINDICATOR TYPEDIGITAL DISPLAY

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030890100 (NAICS 334515) Instruments and apparatus without a recording device specially designed for telecommunications, nesoi
SITC : 87478 Instruments and apparatus for measuring or checking electrical quantities, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

Find Most Relevant Part No of Q-100

  • Q-1-1301
  • Insulation Sleeving
  • Hellermanntyton Limited
  • Q 1 306
  • Insulation Sleeving
  • Hellermanntyton Limited
  • Q-1-310
  • Insulation Sleeving
  • Hellermanntyton Limited
  • Q-1-411
  • Insulation Sleeving
  • Hellermanntyton Limited
  • Q-1-8-19
  • Gage Vacuum
  • Weksler Glass Thermometer Corp
  • Q 10 AKZ4
  • Bus Conductor
  • Weidmueller Interface Gmbh And Co Kg
  • Q-1001
  • Transistor
  • Rockwell Automation Ltd
  • Q-101347
  • Cap Tub
  • White Consolidated Industries Inc

Recently Viewed Parts

Q-100

RFQ

752A

RFQ

BROWSE BY CATEGORIES

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015
asap_member

Aviation Suppliers Association Member
certified_company

FAA AC 0056B Accredited
as6081_supplier

AS 6081:2012 Certification
esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top