Buy F-5668A Filter Band Pass part by R L C Electronics Inc

Part Number:  F-5668A
Alternate P/N:  F5668A
Manufacturer:  r l c electronics inc
NIIN:  013321085
Item Name :  filter band pass
CAGE Code:  12598
INC Code:  00209
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for F-5668A (described as Filter Band Pass), manufactured by R L C Electronics Inc with CAGE code 12598. This part is registered under NSN 5915-01-332-1085, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-332-1085, NCB code 01 (origin: USA), and INC 00209. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your F-5668A requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for F-5668A

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part F-5668A, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number F-5668A with NSN 5915-01-332-1085, 5915013321085

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-332-1085

Item PartTypeName:

FILTER,BAND PASS

59150133210850P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
F-5668A525

Characteristics Data of NSN 5915-01-332-1085, 5915013321085

MRCCriteriaCharacteristic
AFGAOPERATING TEMP RANGE0.0 TO 50.0 DEG CELSIUS
AKNAINCLOSURE TYPEHERMETICALLY SEALED
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 TERMINAL
ADARBODY OUTSIDE DIAMETER1.250 INCHES NOMINAL
AHBTOUTPUT TERMINAL IDENTIFICATIONSMA-RECEPTACLE
AHCHAVERAGE POWER RATING PER FUNCTION50.0 WATTS BLANK
CBBLFEATURES PROVIDEDMOISTURE RESISTANT AND SHOCK RESISTANT
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS1.5 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE INPUT 1ST FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION21.20 MEGAHERTZ BLANK AND 24.50 MEGAHERTZ BLANK AND 35.50 MEGAHERTZ BLANK AND 38.80 MEGAHERTZ BLANK
CRBNVOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION24.5 MEGAHERTZ BLANK AND 35.5 MEGAHERTZ BLANK
ABHPOVERALL LENGTH12.200 INCHES MAXIMUM
AECRVIBRATION RESISTANCE RANGE IN HERTZ0.0 TO 33.0
AGAVEND ITEM IDENTIFICATIONRECEIVER-RECORDER SET,METOROLOGICAL DATA AN/SMQ-11
AHAJREFERENCE FREQUENCY PER FUNCTION30.0 MEGAHERTZ BLANK
AHAQSOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS BLANK
AHASLOAD IMPEDANCE PER FUNCTION50.0 OHMS BLANK
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE BLANK
AHBNINPUT TERMINAL MANUFACTURER CODE12598
AHBPINPUT TERMINAL IDENTIFICATIONSMA-RECEPTACLE
AHBSOUTPUT TERMINAL MANUFACTURER CODE12598
AHBZVOLTAGE STANDING WAVE RATIO PER FUNCTION1.5 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE OUTPUT 2ND FUNCTION
CRBBFREQUENCY BAND WIDTH PER FUNCTION24.50 MEGAHERTZ BLANK AND 35.50 MEGAHERTZ BLANK
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS3.0 MINIMUM BLANK AND 50.0 MAXIMUM BLANK
STYLSTYLE DESIGNATORROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
CQRGBODY MATERIALMETAL

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061990 - Electrical equip: filters
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 593 - Motors and parts, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top