Buy AY3701-4C2 Synchro Receiver Tr part by Raytheon Company

Part Number: AY3701-4C2

Alternate P/N: AY37014C2

Manufacturer: raytheon company

NSN: 5990-00-085-0829

NIIN: 000850829

Item Name : synchro receiver tr

CAGE Code: 06845

FSC: 5990 Synchros and Resolvers

INC Code: 27218

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for AY3701-4C2 (described as Synchro Receiver Tr), manufactured by Raytheon Company with CAGE code 06845. This part is registered under NSN 5990-00-085-0829, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-085-0829, NCB code 00 (origin: USA), and INC 27218. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your AY3701-4C2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AY3701-4C2

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part AY3701-4C2, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number AY3701-4C2 with NSN 5990-00-085-0829, 5990000850829

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-085-0829 Item PartTypeName: SYNCHRO,RECEIVER-TRANSMITTER	5990	000850829	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	7			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
37TRX4A	5	2	5

Characteristics Data of NSN 5990-00-085-0829, 5990000850829

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAQL	BODY STYLE	STANDARD ROUND DOUBLE FLANGE A
AAVH	SHOULDER DIAMETER	3.3290 INCHES MINIMUM AND 3.3340 INCHES MAXIMUM
AAVL	PILOT DIAMETER	1.6250 INCHES NOMINAL
AAZW	SECOND SHOULDER DIAMETER	3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM
AAZX	SECOND SHOULDER LENGTH	0.3750 INCHES NOMINAL
ABHP	OVERALL LENGTH	5.9200 INCHES NOMINAL
ABKK	FLANGE DIAMETER	3.6240 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.2500 INCHES NOMINAL
ABPM	BODY DIAMETER	3.3850 INCHES MINIMUM AND 3.3900 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.2403 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.8900 INCHES NOMINAL SINGLE SHAFT
AGRS	DISTANCE BETWEEN FLANGES	1.3120 INCHES NOMINAL
AHCG	MAXIMUM TEMP RISE	60.0 DEG CELSIUS
AJSL	BODY SIZE	37
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	1.9 AMPERES NOMINAL
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	20.0 WATTS NOMINAL
AJTN	ZSS IMPEDANCE MAGNITUDE IN OHMS	3.00 MINIMUM AND 4.00 MAXIMUM
AJTP	ZSS IMPEDANCE ANGLE IN DEG	66.00 MINIMUM AND 70.00 MAXIMUM
AJVF	PHASE SHIFT ANGLE IN DEG	1.000 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	35.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	170.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-8.0 TO 8.0
AJVM	SPLINE TOOTH QUANTITY	22 SINGLE SHAFT
AJVN	RECEIVER ERROR ANGULAR RANGE IN MINUTES	-36.0 TO 36.0
AJVV	TORQUE GRADIENT PER ANGULAR DEG	0.900 INCH-OUNCES NOMINAL
AJWQ	PILOT LENGTH	0.1600 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.6550 INCHES NOMINAL
AJWW	AFT OF SECOND FLANGE DIAMETER	3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	4.0300 INCHES MAXIMUM
AJXA	SPLINE TOOTH DIAMETRAL PITCH	96 SINGLE SHAFT
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	2A SINGLE SHAFT
CQTM	TERMINAL LOCATION	REAR
CQWQ	SHAFT THREAD LENGTH	0.3870 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	SPLINE W/THREADS SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	0.783 ROTOR TO STATOR NOMINAL
CWBH	SHAFT NOMINAL THREAD SIZE	0.250 INCHES SINGLE SHAFT
TEST	TEST DATA DOCUMENT	81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	5 SCREW
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-S-20708/70 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	7
MGMT_CTL	-------
Quantity per pack	1
Repariability	If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)