Buy ADSP3 E7012A Bearing Ball Airfra part by Rbc Aircraft Products Inc

Part Number: ADSP3 E7012A

Manufacturer: rbc aircraft products inc

NSN: 3110-01-216-8271

NIIN: 012168271

Item Name : bearing ball airfra

CAGE Code: 3NPS1

FSC: 3110 Bearings Antifriction Unmounted

INC Code: 00041

Country: USA

NCB Code: 01

FSG: 31 Bearings

We've received your request for ADSP3 E7012A (described as Bearing Ball Airfra), manufactured by Rbc Aircraft Products Inc with CAGE code 3NPS1. This part is registered under NSN 3110-01-216-8271, classified in FSG 31 Bearings / FSC 3110 Bearings Antifriction Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 01-216-8271, NCB code 01 (origin: USA), and INC 00041. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your ADSP3 E7012A requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ADSP3 E7012A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part ADSP3 E7012A, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number ADSP3 E7012A with NSN 3110-01-216-8271, 3110012168271

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-216-8271 Item PartTypeName: BEARING,BALL,AIRFRAME	3110	012168271	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3929	5	9	5

Characteristics Data of NSN 3110-01-216-8271, 3110012168271

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.7769 INCHES MINIMUM AND 0.7774 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.3870 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AGZC	LOAD DIRECTION	RADIAL
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
AKVV	INTERNAL CLEARANCE	0.0002 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-25013 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	GLASS FIBER OR PLASTIC POLYTETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP 440C BALL
MATT	MATERIAL	STEEL COMP 440C INNER RING
MATT	MATERIAL	STEEL COMP 440C OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING
STYL	STYLE DESIGNATOR	DOUBLE ROW,SELF ALIGNING
ZZZK	SPECIFICATION/STANDARD DATA	81205-BACB10A MANUFACTURERS STANDARD

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482105068 (NAICS 332991)	Ball bearings, nesoi
SITC : 74610	Ball bearings

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9---e
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings